采用的例句大全

Secondary air tuyere: aluminum alloy shutter, the surface was electro-sprayed by epoxy resin.

补风口: 采用铝合金百叶窗, 表面环氧树脂喷涂.

…a report claiming that teachers could be twice as effective if they returned to traditional classroom methods.

声称教师若重新采用传统课堂讲授方法，授课效果会事半功倍的报告

The conventional point setting for flat clothing is known as unitary twill or satin.

盖板针布的针尖排列组织一般采用斜纹、缎纹等单一植针方式.

Printing oriention main drive with dual servo motor NC synchrodrive, positioning accuracy asas $ 0.01 mm.

印花导带主传动采用双伺服电机数控同步传动, 定位精度高达0.01毫米.

CNC system imported from Taiwan and servo motor imported fro japa are adopted.

一、采用台湾进口电脑控制系统和日本进口伺服电机.

The drive system uses the servomotor, than other drive methods are more stabilized reliability.

驱动系统采用伺服电机, 比其他驱动方式更稳定可靠.

System test bus in the system set up for each test hole.

系统测试采用在系统的每个总线上设置测试孔.

When so mounted, the tendency of sediment to settle in the control ports is practically eliminated.

采用这种安装方式, 实际上避免了控制部件上累积沉淀物的倾向.

The influencing factors among the sever responder groups were isolation, social discrimination and negative coping.

高反应者多为隔离受限 、 社会歧视明显以及习惯于采用消极应对方式者.

Inarticle final produced has used the severance way realization the digital clock source program.

在文章的最后,给出了采用间断方式实现的数码钟的源程序.

The core shakeout problem for clamp-casting was solved using dovetail slot structure.

采用燕尾槽活块结构解决了卡头内腔出芯问题.

As a result of the non-axis drive simplifies the transmission system.

由于采用无轴传动,简化了传动系统.

Based on ITAE guideline, three parameters of PID controller are optimized by using simplex method.

基于ITAE准则, 采用单纯形法对液粘传动PID调节器三个参数进行寻优设计,通过优化使系统性能达到最优.

Downhill simplex method is used in this paper to optimize the stripline PIN diode switch.

本文采用单纯形法完成了对带状线PIN二极管开关的优化并开展了PIN二极管 开关的实验研究.

Three model parameters were estimated by using the simplex method.

采用单纯形法对3个模型参数进行了估计.

Another simplification was applied to this model.

在该模型中还采用了另一种简化方法.

A typical multivariable nonlinear system ~ CSTR model is simulated by applying multivariable DMC with Simulink.

采用多变量动态矩阵控制结合Simulink对典型多变量非线性系统一CSTR模型进行仿真.

By simple tensor techniques, a large amount of simultaneous equations are handled successfully.

采用张量法求解了大规模电路方程组.

Simulated AA 7075 aluminium conical shells of missiles are formed by means of hot die forging.

采用热模锻制备7075铝合金导弹锥壳模拟试件,研究了锻后锻件各部位金相组织和硬度值分布情况.

All parameter set by the man-machine conversation operation simpleness and convenience.

全部参数设置采用液晶触摸屏 人机 对话方式,操作简单、方便.