采用的例句大全

Method 17 patients with non-opaque ureterolith calculi were treated with ESWL and retrograde urography ( RGU ) location.

方法采用顺行加逆行 造影 联合定位ESWL治疗输尿管阴性结石17例.

The vibrating spring is made of shear rubber spring, resulting in low noise and long life.

采用剪切橡胶弹簧作主振弹簧, 噪音低,寿命长.

Over sheaths shall be extruded PVC or PE, the graphite shall be coated on the surface.

8外护套采用PVC或PE护套料挤制, 表面涂敷一层半导电涂层.

Estimation of potential shelf life of packaged pasteurized milk utilizing impedance method was studied.

采用阻抗法进行盒装巴氏奶货架期预测。

Electrostatic shielding may be necessary to prevent interference with a desired signal.

为防止静电干扰预期信号,可能有必要采用静电屏蔽.

The management is introducing a shift work.

管理部门将采用轮班工作制.

It uses a 7-speed sequential-manual gearbox with paddle shifters on the wheel.

它采用了7速顺序手动变速箱的换档方向盘上.

The end of the va | ve is double-metal stopping shims of high efficiency.

阀门底端采用双金属止推垫片,止推性能优良.

Abstract: A new project of an automotive shock absorber is developed based on magnetic levitation technique.

文摘: 提出了一种汽车减振的新方案,即采用磁悬浮技术实现汽车振动的主动控制.

Countermeasures to prevent effecf , mainly with shock-proof material shock, etc. and anti-oscillation crevicular.

防止震动的对策, 主要是采用防震材料(防震橡胶等)和设防震沟.

Enclosure is made castingalloy, surface is sprayed with plastics and possessing static electricity resisting, shock-proof etc.

具有外型美观, 抗静电.耐冲击等优良性能,本产品所有外露紧固件均采用不锈钢螺钉.

The continuous SiC fibers coated with B 4 C using chemical vapour deposition ( CVD ) were made.

采用化学气相沉积 ( CVD ) 方法,在连续SiC纤维 表面沉积一层B4C涂层.

MATLAB 6.5 is employed to make the simulation for the new shunt APF.

采用MATLAB6.5对这种新型并联有源电力滤波器进行了建模和仿真研究.

To test for a leaky No.2 shutoff, use the following procedure.

为了检测2号关闭阀的泄漏率, 请采用下列程序.

Design: External form adopts the Siamese twins design, no connection parts, compact structure, beautiful modelling.

设计: 外形采用连体设计 、 无连接部分 、 结构小巧 、 造型美观.

After 1 month treatment, the effect was compared by SIAS's point among the two groups. "

分别采用腹针配合体针、常规体针治疗, 1个月后统计疗效,并比较两组 SIAS 评分提高的情况.

The shared hail adopts the sidewall supply and bottom return mode and globe nozzle outlets.

共享大厅采用侧送下回方式、球型喷口.

The main components are made by Japan Mitsubishi, Omoron, Schneider, Siemens etc.

主要电器采用日本三菱 、 欧姆龙 、 施耐德 、 西门子等品牌.

Adopting Germany Siemens Operation System, this machine owns advantages of convenient PLC Operation and high automaticity.

操场作系统采用德国西门子 、 PLC人机操作方便,自动化程度高.

Only take core line lightly then can shrinkage automatically it is very easy to mount.

采用冷缩电缆附件,无需明火及特殊工具,只需轻轻抽取芯绳即可,就能自动收缩复位,安装非常方便.