钢板的例句大全

General failures and corresponding measures slitting line for steel sheet coils have been introduced.

介绍了钢板卷料的纵剪生产线的常见故障及其维修措施.

It is made of high quality low-carbon steeland sintered and rolled copper alloy as its surface.

该产品以优质低碳钢板为基体,表面烧结铅锡青铜合金,经多次烧结轧制而成.

Enclosure is made of casting alloy, surface is plastics and possessing static electricity resisting, shock-proof etc.

外壳采用铸铝合金或钢板焊接而成, 表面喷塑,外型美观,具有体积小 、 抗静电、耐冲击等优良性能.

The lightness difference method was employed to characterize quantitatively the high temperature oxidation on the tinplate.

采用明度差法表征镀锡薄钢板表面的高温氧化产物的量.

It is made of high quality-carbon steel strip, rolled with-tin alloy on surface with special techniques.

该产品以优质低碳钢板为基体, 表面采用特殊工艺轧制铝锡合金.

Clinical outcomes of wrist arthrodeses with wrist fusion plate

腕关节融合钢板内固定术的临床疗效

Objective The purpose of this study was to evaluate the effectiveness of wrist arthrodeses with wrist fusion plate. Technique of the Wrist MRI

目的评价腕关节融合钢板内固定术的临床疗效。腕关节的MR成像研究

Automatic Detection and Control of Cold Rolled Strip Shape

冷轧带钢板形的自动检测和控制

Objective To introduce treatment of unstable sacrum fracture with reconstruction plate fixation.

目的介绍重建钢板内固定治疗骶骨不稳定性骨折。

As the thickness of a steel plate increases, tensile strength decreases.

随着钢板厚度的增加, 抗拉强度会下降.

Objective : To explore the cause and therapeutical measures of ineffective internal fixation of plate.

目的: 探讨钢板内固定失效的原因及防治措施.

Conclusions: Distal tibia fractures may be treated successfully with plates or nails.

结果: 钢板或髓内钉均可成功治疗胫骨远端骨折.

Weldable high strength steel plate, used for construction, machine mining machine.

可焊高强度钢板, 用于工程机械化等.

a sheet of glass/steel

一块玻璃；一张钢板

Overhead cranes were lifting giant sheets of steel...

高架起重机正吊起一块块巨大的钢板。

Intervention: Open reduction and internal fixation with a locked volar plate and screws.

干预: 切开复位锁定钢板螺钉内固定.

Ventilation system contains ventilators on the roof and walls. Ventilation tube is made of zincificated steel.

通风系统采用屋顶及侧墙通风机, 排风系统风管为镀锌钢板制作.

CuPTiRE anti-erosion hot rolling stripes are divided into two grades in yield strength : 295 MPa, 345 MPa.

09CuPTiRE耐大气腐蚀热轧钢板按屈服强度分为295MPa级和345MPa级两个级别.

The automobile uses three Basic types of spring : coil , leaf, and torsion Bar.

汽车使用的三种最基本的弹性元件为 螺旋弹簧, 钢板弹簧和扭杆弹簧.

It is made of high quality low-carbon steel strip, rolled and sintered tin-lead-bronze alloy on surface.

该产品以优质低碳钢板为基体, 表面烧结铅青铜合金,经多次烧结轧制而成.