间距的例句大全

Bulwark stays shall be provided at two frame spacing intervals.

每两个肋骨间距设舷墙肘板.

Based on HLA , fire unit federation design of ground-to-air missile in air-defense simulation system is introduced.

确定火力单元配置间距是建立 地空导弹 部队战斗部署的重要环节.

N yuan, while non-homogeneous space with a linear array of directional awareness.

同时对N元 非均匀 等间距直线阵的方向性有了一定的认识.

The intercalated anions have a critical effect on the basal plane spacing, morphologies and capacitive properties of the products.

插入阴离子对产物的层间距、形貌和电容性能起很关键的作用。

By cutting different hardness concrete experiment, the cutting characteristics of the special saw with holes or different width segment have been studied.

对多孔锯片及非等间距锯片进行了锯切三种不同硬度的混凝土的实验研究。

For the finally formed lamellar structure made up of α_2 and γ lami-nas, the mean value of interlamellar ( made up of α_2 and γ phases) spacing is approximately in inverse proportion to growth rate cubic root.

最后形成的由α2和γ组成的片层组织的片层间距λ与生长速率的V~（1/3）近似成反比关系。

A Research on the Single Crossover Adopted on LRT Line

轻轨线路采用正常线间距单渡线的研究

Expression of relation between Miller indices and interplanar spacing in base-centered monoclinic lattice

底心单斜格子中密勒指数与晶面间距的关系式

The expressions for the interplanar spacing in FCC and BCC lattices are only related to the odd-even feature of Miller indices.

复杂立方点阵晶面间距的计算式只与晶面指数的奇偶性有关。

It is 5.99 ± 4.54 ( 2.8-11.5) cm between the musculocutaneous nerve incarnation point and the coracoid process.

肌皮神经人肌点至喙突尖的间距为5.99±4.54（7.8～11.5cm）。

While the spraying angle of coolant fluid and the distance between the working rolls and the nuzzles have little influence.

对流换热特性对喷嘴与工作辊之间距离的变化不敏感，冷却液喷射角度的变化对对流换热特性有一定的影响。

Such structural features can be identified by contouring directly on either top or bottom surface of the reservoir with a contour interval of1-5m.

直接以油层顶面（或底面）为准绘制小等高线间距（1&5米）构造图，可显示出微型构造特征。

According to conformal map and relative theory, the relation of path interval between triangular meshes and parametric region is built.

根据协调映射及相关理论，建立了原网格曲面和参数域曲面的路径间距及步长的对应关系。

Fatigue Life Prediction for Fine Pitch Device Soldered Joints Based on Creep Model

基于蠕变模型细间距器件焊点疲劳寿命预测

The Study of Solder Bridge in Fine Pitch Devices

细间距器件焊点桥接研究

Modeling and Predicting of Solder Joint Shapes of Fine Pitch Technology

细微间距器件焊点形态成形建模与预测

In 3-D surface profilometry by means of high-speed laser sheet, since the increase of distance between two optical cross-sections, the discontinuity on the object surface will lead to an erroneous triangular facet and distorted surface reconstruction.

在高速光截法三维面形测量中，由于光截面之间距离增加，物体表面的不连续性将容易导致错误的三角网格化，引起面形重建的畸变。

Determination of the scraper space of scraper conveyer

刮板输送机刮板间距的确定

Drag to add a ledger that has 10 logarithmically spaced lines.

通过拖动可添加分类帐页,由10条间距以对数增长的线构成.

In addition, according to economic analysis and comparison, the effect of dehydration is well at the distance of 20~ 40 m, the charge of construction is about 0.36 yuan per m~ 3 undisturbed soil, and the project expenditure is low.

通过经济性分析比较可以得出，开沟间距为20~40m干化效果较好，每m3原状土的施工费用为0.36元，工程费用较低。