模具

Mold temperature is controlled by water flow in cooling channels.

模具温度可用冷却槽中水的流动来控制.

All lead castings were produced at first by hand in many cases from single cavity molds.

起初所有的铅铸件都是手工生产的,而且在许多情况下都是使用单腔模具.

PING JIN Die Company, founded in 1996, is a private stock enterprise.

平进模具有限公司创建于1996年, 是一家股份制民营企业.

Working at the wheel, the ceramist rounded out the form, and the bowl appeared finished.

认真研究了轮状物后, 陶瓷技师把模具制成圆形, 后来碗就出现了.

The moulds for the foundry are made in the tool-room area.

铸造车间的模具是在工具间生产的。

Maintaining the correct mold temperture becomes more important and may justify mold temperature control equipment.

保持模具有适当温度,越来越显得重要,因而配备模具的温度控制设备是完全合理的.

It seems he is a tool-and-die maker.

他好像是个模具工人。

Spoon the mixture carefully into the mould.

用勺小心地把混合物舀起，倒入模具内。

Eight gridmolds of the conventional design are mounted , equally spaced along the table top's circular edge.

八个普通结构的板栅模具, 沿工作台顶部周边间隔相等.

A clay mould is used for casting bronze statues.

用黏土模具来浇铸青铜塑像。

The mould is then covered to exclude dust.

然后将模具盖好,以防尘埃.

It'seems he is a tool-and-die maker.

他好像是个模具工人.

Also the machine mold is up to the required temperature and is usually controlled by thermostat.

铸焊模具应达到所要求的温度而通常用恒温器控制.

Nowadays badges are stamped out of gunmetal.

现在徽章是用模具从炮铜中冲压出来的.

This will reduce and equalize mold temperatures.

这样会降低和均衡模具温度.