The design process of a total of N of the process scheduler.

Job scheduler schedules for a few times . Process scheduler schedules frequently.

作业调度次数少, 进程调度频率高.

In these cases, an external device such as a SCSI DDS tape drive will often suffice.

在这些情况下, 像SCSIDDS磁带机这样的外部设备通常就已经足够.

Information technology Small computer system interface ( SCSI )-Part 326 : Reduced block commands ( RBC ) has been tested.

信息技术小型计算机系统接口 ( SCSI ) 零件 326: 减少块命令 ( 红细胞 ) 已经过测试.

The chassis provides hot-swap bay for the installation of up to four 3.5-inch SCSI hard drives.

机箱提供可以用于安装最多四个的3.5寸SCSI( 小型计算机系统接口)硬盘的热交换间格.

Press Y switch mode to SCSI, press any other key to disable both channels.

按Y键将模式切换至SCSI, 按其它任意键将禁用两个通道.

When adding SCSI devices you must observe proper bus termination for proper operation.

在添加SCSI设备时,对于合适的操作,您必须遵守适当的总线终结.

SCSI A standard parallel interface for rapid data transmission.

小计算机系统接口(SCSI)一种快速数据传输用标准并行接口.

The SCSI bus must be terminated at each end.

SCSI总线的每一端都必须被终结.

Firstly, we introduce the traditional means of storage, particularly SCSI.

本文首先介绍了传统存储方式, 着重介绍了SCSI接口规范.

After being bitten, seek time is the most important.

被咬伤后, 争取时间是最重要的.

I have never seen such a seismic shift in public opinion in such a short period of time.

我从未见过公众舆论在如此短的时间内发生如此巨大的转变。

Earthquakes produce two types of seismic waves.

地震产生两种地震波。

The seismic tomography technique is a efficient geophysical prospecting method.

地震层析成像技术是一种有效的物探方法.

The historical seismic data are the key determining seismicity parameter in seismic hazard analysis.

在地震危险性分析中,历史地震资料是确定地震活动性参数的关键.

In this paper, field seismic wave fields were simulated with seismic physical modeling technique.

利用地震物理模拟技术在实验室内再现了野外观测到的复杂地震波场.

Finally , the structures, and without VID, are analyzed by comparison in seismic response.

通过算例, 分析了竖向布置阻尼器前后的结构地震反应及耗能效果.

Some examples show that the method can obtain a better resolution in seismic prospecting.

实验结果表明,随机分形插值方法是提高地震分辨率的简单有效方法.

According with the code, building structures are designed under a common vertical and seismic load.

通常的建筑结构设计是在规范的指导下取用具有统计意义的荷载值来进行的.

Detecting fractures by extracting seismic azimuthal anisotropy.

通过提取地震方位各向异性进行裂缝探测.

It is not possible to recognize the existence of blind zones from seismic data alone.

仅仅根据地震资料是不可能确认隐蔽层存在的.