Testing and analyses on thermal physical parameters of green petroleum in coke calcining kiln

Microcomputer Control System of a Pottery Tunnel Calcining Kiln

陶瓷隧道窑炉微机控制系统

Air consumption of the pre-calcining kiln system under normal running conditions

预分解窑系统在稳定运行条件下的用风

Distributing control system with STD industry control computer for shaft cement calcining kiln

水泥立窑煅烧STD工业控制计算机分布式控制系统

Study of Calcining Entire? Cast Furnace Lid Made with Mullite? Fly Ash

莫来石&粉煤灰整体浇注焙烧炉盖的研究应用

Controlling the temperature in the calcining furnace automatically

焙烧炉温度自动控制

Design of the new type of DC eiectric calcining furnace

新型直流电煅烧炉的设计

Particular attention was paid to CaO-MgO-Al_2O_3 carrier. The effect of composition of the carrier, temperature and time of calcining and heat treatment of catalyst on the interaction between carrier and nickel were studied.

并着重研究了CaO-MgO-Al2O3型催化剂载体和镍作用的强弱与载体组成、煅烧温度、时间和值化剂热处理条件的关系。

In this paper, optimizing control of calcining heat and fuel combustion in a ring-type calciner are expounded.

本文阐述了碳素环式焙烧炉的温度控制和燃料优化控制。

The optimal composing of Sol-gel system, daubing times, calcining heat and heat preservation time are experimented in order to confirm optimal technics for dealing with organic dyestuff sewage. Decoloration rate reach 92%.

通过实验确定了溶胶&凝胶体系的最佳组成，对涂膜的次数、煅烧温度、保温时间等因素进行实验，确定了涂膜的最佳工艺，并用于处理有机染料污水，脱色率达92%。

The optimal calcining heat of the film was 500 ℃.

薄膜的最佳煅烧温度为500℃。

I'm incredibly excited about my new role and am keen to bring more of Microsoft's cutting edge innovation and unparalleled commitment to customers and IT industry partners to the Greater China region.

新职务将为整个团队注入新活力，我也希望透过新的使命，能为大中华区广大的市场带来微软的更尖端创新成果以及对客户与IT产业的承诺。

Damage of calcining zone refractories in muffle kiln and it's elimination

套筒石灰窑烧成带耐火材料的损毁与改进

Measuring the Temperature of Calcining Zone in Rotary Kiln by Flame Image Sequence Processing

基于图像序列处理的回转窑煅烧区温度测量

On the analysis of calcining mechanism, this paper discusses the significance of the temperature of calcining zone.

在分析煅烧机理的基础上，探讨了回转窑煅烧带温度对锻后焦质量的影响，以及影响煅烧带温度的主要因素。

Design and Simulation of Temperature Controller for Calcining Zone of Rotary Kiln

回转窑煅烧带温度控制器的设计与仿真

The 400 × 2? kt/ a sulfuric acid plant is one of the largest pyrite based sulfuric acid plants. The fluidized bed calciner is included in the critical equipment, so, how to commission it smoothly is problem of great concern to the Owner.

400×2kt/a硫酸装置是当今最大的硫铁矿制酸装置之一，沸腾焙烧炉是其中的关键设备，如何把它开好是建设单位最关心的问题。

This work mainly focuses on: ( 1) A series of phosphate catalysts have been prepared by precipitation method and sol-gel method respectively. The effects of preparing method, materials, conditions of drying and calcination on the properties of the catalysts have been investigated.

本研究主要包括以下内容：（1）分别以沉淀法和溶胶-凝胶法制备磷酸盐系列催化剂，考察了制备方法、原料、干燥、煅烧等条件对催化剂性能的影响。

The synthesis conditions were investigated such as the type of template, calcination temperature, molar ratio of water and titanium source, and molar ratio of template and titanium source.

通过改变模板剂的类型、焙烧温度、水和钛源的摩尔比、模板剂和钛源的摩尔比等因素，探索制备有序介孔二氧化钛的最佳条件。

Studies on the mechanism of leaching silicon and aluminum from bentonite have been processed by adjusting reaction time, calcination temperature, ratio of alkali to bentonite, the kind of alkali etc.

并通过改变反应时间、煅烧温度、碱土比、碱的种类、以及焙烧与否，对膨润土的硅、铝浸出机理作了比较深入的研究。

The effects of the preparation conditions, such as calcination temperature, ratio of sol and zeolite and exchange times were investigated.

研究了煅烧温度，溶胶沸石配比，交换次数等制备条件对催化剂的影响。