An Intelligent Diagnostic System Based on the Complex Diagnosis Base of BaoGang Wire Rod Production Line

The welding process of nickel base welding wire for tube to tube sheet used in HP heater of330 MW and above power unit has been described in the article.

本文依据工程实践经验，介绍了镍基合金、石墨、钢衬聚四氟乙烯三种材料的应用防腐情况、使用条件，对于氟化选材有指导意义。

Have prepared 0.2 mm ultra fine tin base welding wire successfully, have determined the process preliminarily of 0. 1 mm ultra fine tin base welding wire.

成功制备了0.2mm的超细锡基焊丝，初步确定了0.1mm超细焊丝的制备工艺。

Fabrication of Steel Fiber Reinforced Copper Base Composite Wire Using Bundle-Drawing Technology

集束拉拔法制备钢纤维增强铜基复合导线

Often these consisted of small pieces of brightly printed metal strung by wire to a thicker base wire.

一般来说，风铃由用金属线串起来的小块亮印花金属组成，然后固定在一根较粗的基础导线上。

Influence of finished product procedure process on tempered bead wire adhesion force

成品工序工艺对回火胎圈钢丝黏合力的影响

Technology Study of Factors Affecting Binding Force of Electroplating Copper on Bead Wire

影响电镀紫铜胎圈钢丝粘合力因素的工艺探索

Influence of Basic Characteristics of Bead Wire on Tire Performance

胎圈钢丝的基本特性对轮胎性能的影响

Design and Research of Flat Bead Wire Production Line

胎圈用扁钢丝生产线设计与研究

Watson had pushed the pieces apart, and the metallic vibration had been carried to Bell over the wire.

华特生把金属片分开了，金属的振动就通过电线传到了贝尔的那端。

When analyzing a system of conducting bodies interconnected by wires, the current expansion functions consist of three classes, body expansion functions, wire expansion functions and junction expansion functions.

在线面连接问题中，电流展开函数包含体展开函数、线展开函数和连接点展开函数三类。

In the threaded holes to improve low-intensity body strength, the wire thread insert effect is obvious.

在改善低强度机体螺纹孔强度方面，钢丝螺套作用非常明显。

Biosensors attached to the body send data by wire or radio.

附在身体里的生物传感器，传送数据通过电信或无线电波。

The ultrasonic testing methods for blades with fork root, blades with fir-tree root, the transition zone from blade to root, blade body, lacing wire, and shroud band in heavy-duty steam turbine have been presented.

介绍了大功率汽轮机叉型叶根叶片、枞树型叶根叶片、叶身和叶根过渡区、拉筋、围带的检测方法。

Deep Mine Pressure Behavior and Combined Support Technology with Bolt Cable Wire

深部矿井压力显现规律与锚索网联合支护技术

Application of Combined Support with Bolt Wire Net Shotcrete Cable and Belt at Meeting Coal Point, Broken Fault Zone and Roadway Crossing Point

断线（绽线或磨断）锚网喷索带组合支护在见煤点、断层破碎带、巷道交岔点的应用

Level in Xing'an Coal Mine, the engineering characteristics of combined support with bolt wire cable and shotcrete in roadways driving are analyzed.

结合兴安煤矿四水平中央泵房的工程实践，分析了在掘进巷道中锚网索喷支护的工程特点。

Application of Combined Support with Bolt Wire Cable and Shotcrete in Construction of Deep Large Section Rock Roadway

锚网索喷支护在深部大断面岩巷施工中的应用

When the aging time is 40 d, the cloud-like structure transforms into rectangular island-like structure and there are many cavities inside the bond wire, which are different from the Kirkendall voids because of the shape and dimension.

老化40d时，引线内部出现大量的孔洞并存在方块岛状的Al-Ni组织，其尺寸和形状显示与Kirkendall孔洞不同。

Including Bond Wire and Pad effects both, detailed performances have also been proposed with NF deterioration to 3.21/3.23 dB, but S parameters change a little after tuning and optimization, finally, the circuit turns out to have outstanding performances.

完全考虑Bond Wire和Pad效应的性能参数也已经给出，但噪声系数恶化为3.21/3.23dB，S参数在电路调整优化之后变化不大，整体性能比较突出。

Through the reliability test, the NTC CUP process is suitable for thinner bond wire. So we can reduce the cost of the product which is lower driving current through wafer process change.

通过可靠性试验的研究发现，NTC的CUP工艺，在目前情况下只适用于线径较细的焊接工艺，因而可以对一些驱动电流较低的产品进行芯片工艺改进，降低芯片成本。