The fuel hits on the plate with guide arc and little shoulders, reflects in the form of vapor and forms the stratified wall jet.

Experimental Investigation and Numerical Computation of Wall Jet under Gate

闸下附壁射流的实验研究与数值计算

Experimental study of a plane wall jet destroying density current

水平附壁射流破异重流试验研究

After studying the spray impinging process by experiments, it is discovered that the fuel concentration of the wall jet will decrease rapidly after the spray impinging the wall. the wall jet vortex is also discovered at the peripheral region of the wall jet.

通过对平面撞壁过程的研究，发现喷雾着壁之后，壁喷区的燃油浓度开始急剧耗散，在壁喷区的外围，出现壁喷游涡现象。

A Simple Model for Calculation of Turbulent Wall Jet

计算湍流附壁射流的一个简单模型

Three Dimensional Numerical Modeling of Half Wall Jet of TRB Combustion System

TRB燃烧系统喷雾半壁射流混合的三维数值模拟

Study of the Velocity Field of Nozzle Wall Jet with PIV Measurement Method

使用PIV技术测量喷嘴附壁射流的冷态流场

The analysis of the numerical simulation results obtained that the sphere of influence of the three-dimensional wall jet has a linear relationship with the jet ratio, it increases with the increase of the jet ratio.

对数值模拟结果的分析得出：三维壁面射流的影响范围与射流比呈线性关系，随着射流比的增大而增大，同时随着动水速度的增大，影响范围的增大速率也逐渐增大。

Based on this, the paper researched the mechanism and characteristics of the three-dimensional wall jet in dynamic water.

基于此，本文对动水环境下三维壁面射流机理特性进行研究。

Study on 2-D plane wall jet in static circumstances

静止环境中二维水平附壁水射流的研究

Analysis of local scour caused by a two dimensional wall jet

二维贴壁射流冲刷试验成果分析

Controlling air velocity in the working space of a wall jet air supplied room

贴附射流房间内工作区合理空气流速的计算方法

The boundary of a wall jet can be approximately regarded as a straight line and the angle of spread is 7.67 degrees;

有限空间附壁射流边界近似为直线，射流扩散角约为7.67°；

Model of wall jet;

附壁射流模型；

We use tiles to cover roofs and sometimes floors and walls.

我们用瓦片盖房顶,有时也用瓷砖铺地面和墙面.

There is a kind of rough wall surface, which is said to be sound-absorbing.

有一种墙面是麻的, 据说可以吸音.

Tall sheet pile walls usually require a-back anchor placed in the ground some distance wall face.

高大的板桩通常需要在土体中面板后一段距离的地方设置锚固区.

The measures for shell assembly and end wall face-to-face assembly are special manufacture experience.

在装焊过程中合缸、端壁 面对面 装配等措施是独特的制造经验.

And climb again the broken bank of wall-face.

勇攀再次打破了银行在墙上 - 脸.

And climb again the broken bank of my wall-face.

攀登再次打破我的银行墙上的脸.

This factory manufactures indoor textile wallcovering.

这家工厂制造室内布质墙面装饰.