In this paper, a large number of different materials are selected to do the small punch test. A deeply research was carried out about GTN model, equivalent stress and strain in finite element simulation of the small punch test.

In this paper, the finite element method based on GTN model is used to investigate the ductile crack growth behavior in the three-point bending specimens of the dissimilar metal welded joint.

本文采用内嵌GTN损伤模型的有限元方法，建立了核电异种金属焊接接头三点弯曲试样的有限元模型，数值模拟延性裂纹的起裂和扩展行为。

Study on the shrinkage deformation of thin composite laminates during curing process ductile damage analysis for fracture in sheet metal forming based on GTN mesoscopic damage model

复合材料薄板的成型固化收缩变形研究基于GTN细观损伤模型的板料成形过程损伤分析

There is more error in simulating void growth under unaxisymmetry triaxial stress conditions using R-T model and GTN model.

用R-T模型、GTN模型模拟非轴对称三轴应力状态下材料微孔洞损伤演化有较大的误差。

It was reported that using the PEA protocol as the first choice for high-risk GTN, and had achieve good effect.

有报道使用PEA方案作为高危GTN的首选治疗方案，取得良好的疗效。

Combining the experimental tensile test and finite element simulation, the inverse method is carried out to identify the GTN damage parameters.

采用逆向方法，将单向拉伸试验与有限元数值模拟相结合来确定GTN模型损伤参数。

Ductile damage analysis for fracture in sheet metal forming based on GTN mesoscopic damage model

基于GTN细观损伤模型的板料成形过程损伤分析

Brief discussion about the application of GTS-311d total station in canal construction

浅谈GTS-311D型全站仪在运河施工测量中的应用

Development of Software for GTS 126 Paging Services

GTS-126寻呼系统软件开发

Application of the Combination of SCS Software and GTS 211 D on Field Survey

SCS软件与GTS211D全站仪相结合在测量中的应用

DRAWING MAP WITH GTS AND PLANE TABLE New methods for surveying the plane curves

全站仪与平板仪相结合测绘地图平面曲线详测新法

User demands; GTS is a user-level job scheduling system on Linux.

GTS是一个用户级的任务调度系统，它建立于Linux之上，主要负责对用户任务的调度。

Application of MIDAS/ GTS in the 3D analysis of slope

Midas/GTS软件在边坡三维稳定分析中的应用

Finite element simulation and analysis of static load testing of single piles based on GTS

软土地基中单桩静载荷试验的数值模拟基于GTS对单桩静载试验的有限元模拟分析

Conclusion PET/ CT is useful for improving the accuracy of GTV delineation for the protection of the normal tissues during radiotherapy.

结论PET/CT图像融合能提高骨转移瘤GTV勾画的精确性和重复性，从而减少对周围正常组织损伤而增加放射治疗的增益比。

To investigate the impact of gross tumor volume ( GTV) on the short-term response of radiotherapy for esophageal carcinoma.

观察食管癌大体肿瘤体积（GTV）大小对放射治疗近期疗效的影响。

Results The dose distribution in nasopharyngeal GTV and CTV were satisfactory both in CT simulated and conventional planning.

结果不论是CT模拟计划还是常规模拟计划，鼻咽GTV和CTV均可有满意的剂量分布。

Comparison of Pathological T-staging with Gross Tumor Volume ( GTV) of Esophageal Cancer by CT Scanning

食管癌肿瘤体积与病理T分期对照研究

The GTV delineation of lung cancer's PET-CT simulation

肺癌PET-CT模拟定位靶区勾画探讨

Conclusion: MR was more accurate than CT in delineating GTV of NPC.

结论MRI组勾画靶区较CT组精确。

The fractional dose and volume of GTV are independent prognostic factors for the overall survival.

分次剂量和GTV体积为影响患者生存时间的独立预后因素。