Fluency in English and Mandarin is essential.

Fluency in English, Mandarin an advantage.

英语流利, 懂汉语者优先.

Fluency in English spoken and written. French speaking will be preferred.

良好的中英文写作、口语、阅读能力. 如会法语更佳.

Her fluency in English reflected great credit on her teacher.

她流利的英语为她的老师争了光.

As a recently developed separation technology, the supercritical fluid extraction a very wide development prospect.

超临界流体萃取是一种新兴的分离技术, 具有十分广阔的发展前景.

Some literatures have been reported on supercritical fluid extraction of essential oil transferextraction processes.

其中,超临界流体萃取植物种子油已成为热门研究课题.

The extraction velocity and capacity are important basis for supercritical fluid extraction design.

萃取速率和萃取量是超临界流体萃取过程设计的重要依据.

Reservoir geometry significantly influences the flow field and consequently the pressure transient response reservoir fluid flow.

油藏几何形状对井底压力动态响应有显著的影响.常规的解析方法却只能解决一些简单、规则形状的问题.

Under normal circumstances, concrete pumping pipe center at columnar fluid flow status was suspended.

正常情况下, 混凝土在泵送管道中心形成柱状流体,呈悬浮状态流动.

The fluid flow and heat transfer in welding processes have major effect on welding quality.

焊接熔池中的流体流动及传热过程是影响焊接质量的重要因素.

Physics-based fluid flow simulation is commonplace in many scientific and mathematical computations.

流体模拟作为计算机模拟的重要一项,是逼真展现世界的不可或缺的部分.

Because of fluid flow the liquid and transfer the energy impact.

由于流道内液体是通过液体撞击而传递能量.

The water lock is formed, which increases the fluid flow resistance.

产生水锁效应, 增加油流阻力.

The developed measurement is applicable in the particle-fluid flow.

本文开发的摄像测量方法也可用于其他颗粒 - 流体运动试验.

Usually identify the printing inks have sunlight, fluorescent light source and electric lighting.

凡是辨别印品不朱色的平源有日平 、 日平灯和电灯平不一栽.

The moon as bright as a fluorescent light. It made the clouds look fluffy.

月亮发出荧光灯似的寒光来, 使得云彩看上去毛绒绒的.

I change a fluorescent light.

我更换日光灯.

The higher wall heat flux causes more apparent gas acceleration along the channel.

同时,除了在进口区域,较高壁面热流提升了通道沿程的换热能力.

The effects of radiant heat flux, moisture content and species on the ignition behavior were analyzed.

测定了材料的表面温度和质量损失速率,并分析了辐射热能流率 、 含水率和材料种类对材料着火特性的影响.

The meshing requirement of finite element model theand the calculating method of heat flux are expatiated.

采用焊接仿真用到的经典高斯热源模型,设计了基于表参数热流密度加载算法.

But current density and heat flux on deformed weld pool surface are not similar Gauss distribution.

而变形熔池表面的电流密度和热流密度分布则不再符合近似的高斯分布.