Thermal stability is poorer, the meeting when heating produces more foam.

The results indicated that 4 exhibited excellent thermal stability and optical property.

结果表明,4具有较高的热稳定性及优良的光学性质.

Two surfactants with thermal stability and salt resistance properties were observed.

提出两种结构的表面活性剂,考察了它们的耐温耐盐性能.

The alloy has excellent thermal stability.

合金有极好的温度稳定性.

Shashi Thermal Power Plant Unit No.9 declared officially retired.

沙市热电厂9号机组宣告正式退役.

Welding quality is a factor of engineering quality in the construction of thermal power plant.

电站建设中,焊接质量是工程建设质量的关键.

Which proposed a new mathod to optimize operation of the thermal power unit.

为火电机组的优化运行提出了一种新思路.

Computer Analysis of Thermal Power Plant.

火电厂计算机分析“,”

Main subjects: thermal power engineering and engineering physics, nuclear science and technology.

主干学科: 动力工程与工程热物理 、 核科学与技术.

This paper presents an improved protecting system for the thermal power generator.

为确保热力发电机组运行安全,每台机组必须配置完善的保护系统.

Roller screen is suitable for feeding coal system in thermal power plant.

滚轴筛主要用于火电厂输煤系统.

Spraying equipment along with roller axial movement speed determines the roller surface coating thickness.

喷涂装置沿辊筒轴向移动的速度决定了辊筒表面获得的涂布厚度.

Coating thickness measurement control depends on the speed of the gap and roller.

涂层厚度的控制就取决于计量辊的间隙和辊筒的转速等因素.

Results show that thermal fatigue behavior is associated with circle temperature and coating thickness.

结果表明,复合涂层的热疲劳行为与热循环上限温度、涂层厚度有关.

The back of the coating thickness according to need.

不面后涂层的厚度可根据需给.

The result gave the optimal filter particle diameter, layer thickness and filtration velocity.

根据实验结果,确定了最佳的过滤介质粒径 、 过滤层厚度和过滤速度.

Then use the same way after measuring coating photographic-screen reduced thickness, the two worst layer thickness.

再用同样的方法测量涂布感光胶后的丝网厚度, 两者减差就是胶层厚度.

It was found that the current and EL intensity synchronously swing with increasing Si layer thickness.

在一定的反向偏置下,电流和电致发光强度都随Si层厚度的增加而同步振荡,位相相同.

Develops the mathematic model and program for the optimization design of insulation layer thickness.

建立了保温层厚度优化设计数学模型,并编制了优化程序.

Light intensity and layer thickness had little effect on the molecule weight of the polymer.

表面入射光强和液层厚度对分子量的影响不大.

When the glue layer thickness to a certain value, bond stretch will begin to decline.

当胶层厚度增到一定值后, 粘结牢度便开始下降.