DISCONNECT THE BODY 20-WAY CONNECTOR ( AT BODY CONTROL MODULE ).

The software is composed of interface module, control module and simulation module.

软件含接口 、 控制、仿真等模块,具有较强的可移植性和人机交互能力.

Unit remote from separate control module for ease of service repair.

实现了在独立的控制箱上遥控加热和硬件,以便于操作和维护.

Give a method to format set the communication between each control module.

提出一种格式化建立各个控制模块间通信的方式.

It is concluded that 90 % is the optimistic soil moisture content for tomato seedling bed irrigation.

因此认为番茄苗床灌溉土壤含水量最佳上限为90%.

Results showed that there was a negative correlation between structure of fabrics and the moisture absorption.

实验结果表明:织物的吸湿速率与其经纬密度成负相关.

Because the cotton moisture absorption strong, and well positioned to absorb the sweat on the skin.

因为棉料吸湿性强, 可以很好地吸收皮肤上的汗液.

Moisture absorption and sweet dischargeable fiber will become of a new upgrade product of polyester fiber.

吸湿排汗纤维将成为一种新型的聚酯纤维升级换代产品.

The moisture-absorption and moisture-retention capacity of chitosans with different degree of deacetylation andand N-carboxybutyl-chitosan were studied.

透明质酸具有良好的吸湿、保湿性能,被认为是“理想的天然保湿因子”.

Gas generation from the board by moisture absorption.

线路板受潮产生气泡.

Are proper Methods: Used to prevent moisture absorption?

是否有相应的避免吸收水分的方法?

Low moisture absorption, the physical properties of stability.

低吸湿性, 物理性质稳定.

In moisture absorption and permeability, the fiber can not be compared.

在吸湿性和透气性方面, 合成纤维无法与之相比.

In-mold stainless mesh prevents penetration and increase moisture absorption and heat transpiration.

一体成型之不锈钢网,防穿刺,且提高吸湿散热效果.

Together with extract useful information from the experimental data of molten salt phase diagrams.

用人工神经网络方法研究熔盐相图中间相的组成、熔点和同分熔化或异分熔化等规律.

In this paper, Al-RE alloy was prepared by molten salt electrolysis.

本实验使用熔盐电解法制备了稀土铝合金.

Molten salt flowing through the receiver is heated to run a generator.

融化的盐水流过这个收集塔,加热后,推动发电机发电.

Metallurgy A channel along which molten metal is poured into a mold ; a gate.

使熔化了的金属注入模子的渠道; 通道.

To shape molten metal by pouring into a mold to produce an ingot or cast slab.

将熔融的金属倒进模子里成型,以制成锭铁或扁钢锭.

They poured the molten metal into molds.

他们把熔化了的金属浇灌到模子里.

Molten metal is poured back into the moulds.

已熔的金属被倒回注入到铸模里.