This paper presents a new method for hypocomputer to automatic follow the maincomputers baud rate.

The error of baud rate setting is a very important parameter in communication.

波特率设置的误差是通讯中一个很重要的参数.

Serial debug terminal settings: 115200 baud rate, one stop bit, no parity bit.

串口调试终端的设置: 波特率115200, 一个停止位, 无校验位.

Baud: Number of computer bits transmitted per second over a data communications channel.

波德: 在一个数据通信通道中,每秒种所传送的数元量.

Address, baud of communication port setting.

1通讯地址码 、 波特率设置.

I one day can hear to, to see to 100 many times Harry baud given name.

我一天就能听到 、 看到100多次哈里波特的大名.

Through the test result , it has not delay when 8051 SC COM baud rate is 2400 bps.

实际测试中, 在8051串口波特率在2400bps时,对数据打印没有明显延时.

Yes, floppy day , as did 9600 baud dial up modems.

是的, 当时软件是最主要的工具,还有9600波特拨号调制解调器.

The effect of full bit error on the baud rate is also analysed.

分析了整位误差对波特率误差的影响.

In the hardware, the clock circuit is designed, and the baud rate is configured.

硬件方面设计了时钟电路和波特率配置.

The system provides local display of telemetering data , telesignal data , baud rate, local address and telecontrol implement command etc.

该系统还显示本地遥测量 、 遥信量 、 波特率及本站地址,也显示遥控执行命令.

A 4-line mode and changeable baud-rate serial communication is used for connecting transducer and controller.

PC机与变频器之间是通过异步串行波特率可变四线制通信方式来联接的.

This is useful for high baud rate terminals that need only a minimal delay.

在需要最小延迟的高波特率的终端上,这种方法很有用.

Through the software to achieve the data format and matching the baud rate.

本方法通过软件来实现数据的格式、波特率的匹配.

This paper intraduces a software method for detecting the hardware protocol ( baud rate, data bits, ets ) of serial data transfer.

介绍了一种用软件侦测串口底层协议 ( 波特率 、 数据位等 ) 的方法.

The Baud Rate Field should contain only numbers.

“波特率”字符域只能含有数字.

For serial download, 38400 baud rate.

用于串口方式下载, 波特率38400.

Mode one and changeable 8 bits baud rate are adopted during communication.

AT89C5通讯采用串口方式1,波特率8位可变.

Serial applications, the serial initialization, baud rate, parity bit and other settings.

串口应用程序, 串口初始化, 波特率, 校验位的设置等.

SET BAUD RATE , PARITY , WORD SIZE , AND STOP BITS.

设置波特率,奇偶效验, 数据位,停止位.

You need to use computer software debugging port. 9600 baud rate.

需用电脑串口软件调试. 波特率9600.