The energy and cavitation performances are the basic characteristics of 2-D cascade.

If the injection period is extended long enough, the effects of isolated eddy cavities are neutralized.

如果喷注时期延续得足够长, 隔开的涡流区的影响被抵消.

The dentist filled several cavities in my teeth.

牙医给我的牙堵了好几个洞 excavation 指“挖掘的洞”,如:

Both conditions filled the brain with " vacuoles ", small cavities resembling the holes in a sponge.

两者的脑都布满 “ 空泡 ”, 一些像海绵中的小空泡.

Reefy boundstone or framework commonly contains large cavities formed through rapid organic growth.

礁块的粘结岩成骨架中通常有大洞,是由于生物快速生成形成的.

Conclusions Double balloon and triple cavities is effective in postpartum bleeding treatment.

结论双气囊三腔管是治疗产后出血的一种有效治疗方法.

Numerous and extensive eddy cavities retard the turbulent mixing process.

多而大的涡流区延迟了扰动的混合过程.

The chest and abdominal cavities are opened here at autopsy.

尸体解剖显示胸腔和腹腔.

The dentist said that I had two cavities that needed filling.

牙医说我的牙有两个洞需要补.

Disconnect test leads from relay cavities immediately after testing.

测试后立即从继电器上拆卸测试导线.

No, it is very loose. You also have cavities.

我不能保住它, 因为它非常松动. 你同时还有蛀牙.

Epithelium also lines the air tubes and lung cavities.

上皮组织还衬盖气管和肺腔.

The new designs utilize over-moded cavities and also exhibit pseudo-elliptic transfer functions.

这种利用多模腔的设计也具有准椭圆传输函数特性.

Cavities in teeth are caused by decay.

牙齿上的空洞是由龋蚀造成的.

Pathologic study: hyperplastic fibrous tissue in pelvic cavity, Hyperplastic capillary vessel in lipid tissue.

术后病理报告: 盆腔增生纤维, 脂肪组织中原壁血管增生.

Tube in the throat and upper thoracic cavity through which air passes in respiration.

喉部以及胸腔上部的管子,呼吸时让空气通过.

Secondary trimming is needed to separate the finished product from the excess material secondary cavity.

负面因素方面,溢流的材料必须循环使用、它也带来切除这一多余工序.

The resonator ( astigmatic ) can be compensated by inserting a suitable thickness Brewster plate in the cavity.

在腔内插入一定厚度的布儒斯特片可以部分消除腔的像散.

Gastightness detector is specifically applied to models of the cavity sealing products leak detection devices.

气密性检测仪是专门应用于对腔体机型产品进行密封性检漏检测的装置.

All lead castings were produced at first by hand in many cases from single cavity molds.

起初所有的铅铸件都是手工生产的,而且在许多情况下都是使用单腔模具.

External defects: undercut , overip , arc pit, gas cavity in surface, crack in surface.

外部缺陷: 咬边 、 焊瘤 、 弧坑 、 表面气孔 、 表面裂纹.