Polyester film, inductive, epoxy resin coating.

Often used as curing agents in epoxy compounds.

常被用作环氧树脂固化剂的化合物.

This product is made by high strength fiber and epoxy resin under winding process.

该产品系采用高强纤维和环氧树脂经特殊工艺缠绕成型.

High stable epoxy resin emulsion can be prepared through choice of optimum emulsififier and technological condition.

用乳化剂对环氧树脂进行乳化,制得较稳定的环氧树脂乳液.

May be precoated with epoxy, vinyl, polyurethane or other coatings recommended.

可以复涂以环氧 、 乙烯基 、 聚氨酯涂,以及其它推荐涂层.

All the robs are glued together by instant glue first and then by epoxy adhesive.

所有失去了粘在一起,是透过即时胶水第一,然后由环氧胶粘剂.

Polyester acrylates's physical properties fall between epoxy acrylates and urethane acrylates.

聚酯丙烯酸酯的物理性能介于环氧丙烯酸酯和聚氨酯丙烯酸酯之间.

Now it has thinner for kinds of resin and PU, Epoxy and Am.

目前,公司产品涉及各类树脂稀释剂,PU面﹑底漆稀释剂, 硝基稀释剂及各类天那水等品系.

The application of one part epoxy dispersion for building field is discussed emphatically.

重点讨论了单组分环氧乳液作为胶粘剂在建筑领域的应用.

The repulping of wet strength waste papers containing epoxy wet strength agents is difficult.

使用了环氧类湿强剂的湿强废纸存在再制浆困难的问题.

The impact and toughness of unmodified cured epoxy resins are poor, which restrict its applications.

未改性环氧树脂固化物存在质脆、冲击性能差等缺点, 限制了它的应用.

A parallel interface technology, which enlarges CAN, in EPP mode is mainly discussed.

介绍了一种基于CAN总线 的电涡流传感器测试系统, 重点研究了EPP模式下并口扩展CAN总线技术.

Check cable and connection to phone and check LPT settings in BIOS, EPP + ECP.

确认手机与仪器连接正确,并且检查BIOS中并口的设置, 选择“EPP+ECP”

This article designed a kind of virtual instrument base on Parallel Port ( EPP ) of computer.

本文设计了一种基于计算机 并行接口 的虚拟仪器.

EPROM devices is used widely for microcomputer system and computer application field.

目前,在微机系统及计算机应用领域,尚大量使用EPROM器件.

Introduced latent energy of EPROM & its design and application.

介绍了EPROM的潜能 和 设计应用.

Reading data out of the device is similar to reading from other Flash or EPROM devices.

从设备读数据对从其它的朗诵类似闪光或EPROM设备.

Under the radiation of high POwer microwave ( HPM ) the series of 27 -- EPROM present temporaryand Permanent failure.

在高功率微波 ( HPM ) 辐射下,27系列 EPROM 存储器呈现出暂时失效及永久失效两种情况.

For such applications program are fixed and are written into ROM or EPROM of the microcontroller.

对这些应用器件,程序被固化,并被写入微控制器的ROM或EPROM中.

The program is assemblied to object code andis written in EPROM chip finally.

程序系统被汇编成目标码后写入到EPROM芯片中.

Once erased, an EPROM can be reprogrammed with the help of a device programmer.

一次擦除后, EPROM能在设备编程器的帮助下被重编程.