A dual-curing epoxy monoacrylate resin was synthesized, which contain both epoxide groups and unsaturated double bonds.

The epoxides were obtained with up to 90 % yields in the reaction system with air.

在空气存在下其氧化产物的产率这90%上.

Vinyl others in combination with cationic epoxies cure extremely fast, producing very hard, high-gloss coatings.

乙烯醚同阳离子环氧树脂组合后,固化特别快, 形成非常坚硬, 高光泽的涂层.

Apply over primed metal , recommended primers are epoxies, vinyls or other surface as recommended.

适用于已涂有配套底漆的金属表面, 推荐底漆为环氧 、 乙烯或其它推荐底材.

Volatiles should not be added to the epoxies to improve their viscosity.

不应将挥发物加到环氧树脂中去改善它们的粘性.

Because of their excellent adhesion to metals, epoxies are widely used as primers.

因为它的对金属优异的附着力, 环氧树脂被广泛应用于底漆.

Apply over plastics, fiberglass or primed metal , recommended are epoxies, vinyls or other surface as recommended.

适用于塑胶, 玻璃钢等底材或已涂有配套底漆的金属表面, 推荐底漆为环氧 、 乙烯或其它推荐底材.

As hardener of many resin systems , such as resoles , epoxies, amino-Plastics and furniture lacquers.

油漆业可当.树脂之硬化剂, 例如:氨树脂 、 环氧基树脂和酚树脂;木造家俱漆之硬化剂.

In this paper, epoxy resin adhesive modified by polysulfone is studied.

研究了聚砜改性环氧树脂胶粘剂.

Glass fiber reinforced epoxy resin is synthesized to meet the demand for substrates of foilstrain gages.

为满足传感器应变计基底材料的特殊要求,制备了玻璃纤维增强环氧型基底材料.

Epoxy structures can be similarly identified , provided they are not fully alkylagted.

没有完全烷基化的环氧结构也可以同样地加以鉴识.

The epoxy resin E 51 and acid are used to synthesize curing EA resins.

环氧树脂和丙烯酸在适宜条件下合成EA树脂.

Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied.

同时对纤维塑料筋与水泥装和环氧树脂的粘结强度也进行了探讨.

High purity calcium epoxidized acid salt with epoxy groups preserved completely was synthesized directly.

以一种简便的方法制备了环氧基保留完好的高纯度环氧脂肪酸钙.

Polyester film, inductive, epoxy resin coating.

聚乙酯膜, 有感结构, 环氧树脂包封.

Often used as curing agents in epoxy compounds.

常被用作环氧树脂固化剂的化合物.

This product is made by high strength fiber and epoxy resin under winding process.

该产品系采用高强纤维和环氧树脂经特殊工艺缠绕成型.

High stable epoxy resin emulsion can be prepared through choice of optimum emulsififier and technological condition.

用乳化剂对环氧树脂进行乳化,制得较稳定的环氧树脂乳液.

May be precoated with epoxy, vinyl, polyurethane or other coatings recommended.

可以复涂以环氧 、 乙烯基 、 聚氨酯涂,以及其它推荐涂层.

All the robs are glued together by instant glue first and then by epoxy adhesive.

所有失去了粘在一起,是透过即时胶水第一,然后由环氧胶粘剂.

Polyester acrylates's physical properties fall between epoxy acrylates and urethane acrylates.

聚酯丙烯酸酯的物理性能介于环氧丙烯酸酯和聚氨酯丙烯酸酯之间.