In finite and tiny displacement machine, flexural hinges a new structure machine to implement tiny displacement.

By using yield line theory, the calculation formulas of shear and flexural capacity are given.

运用屈服线理论提出节点抗弯 、 抗剪承载力计算公式.

In this case, the power is supplied by piezoelectric flexural transducers.

在这个例子中, 压电式受弯换能器提供电能.

Testing mechanism of flexural rigidity is described.

描述了抗弯刚度的测定机理.

For flexural strength test of cement specimen and other nonmetallic material.

用作水泥或其它非金属脆性材料试块的抗折强度测定.

Pultruded fiberglass is stronger, and has higher flexural strength than timber.

拉挤玻璃纤维是强, 具有较高的抗弯强度比木材.

The flexural strength and tensile strength slightly decreased.

复合材料的弯曲强度和拉伸强度稍有降低.

The flexural strength, relative dielectric constant and dielectric dissipation factor of the composite were measured.

测试了复合材料的断裂强度, 相对介电常数和介电损耗.

The tensile strength, impact strength, flexural strength, thermal properties and morphology of the composites were investigated.

研究了复合材料的拉伸强度 、 冲击强度 、 弯曲强度 、 形态及热性能.

The relationship between nucleation temperature and flexural strength was investigated.

研究表明:抗弯强度、晶相含量随温度的升高先提高然后有所下降.

Advanced technical ceramics-Methods of testing monolithic ceramics-Thermomechanical properties-Part 1: determination of flexural strength at elevated temperatures.

高级工业陶瓷.整体陶瓷的试验方法.热机械特性. 第1部分: 高温下挠曲强度的测定.

Flexural strength and elasticity decreased significantly with increasing wood content.

4.含木率之增加降低了抗弯强度及抗弯弹性率至为显著.

Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part 1: determination of flexural strength.

高技术陶瓷. 单片陶瓷. 室温下的机械特性. 第1部分: 抗弯强度的测定.

The material mechanical properties, such as flexural strength, are measured by three point bending techniques.

利用三点弯曲方法测定了材料的抗弯强度等力学性能.

The flexure hinge mechanism is the key part of the inchworm type of X-Y-θ micro stage.

工作台的核心部件柔性铰链传动机构采用对称设计,有利于运动的 导向.

Effect of core ∶ dentin thickness ratio on the flexure strength of IPS Empress heat-pressed all-ceramic restorative material.

基底瓷与饰瓷的厚度比对IPSEmpress热压铸陶瓷抗弯强度的影响.

The stator clamps rotor by a flexure hinge clamping structures in symmetrical directions.

定子采用柔性铰链双侧对钳方式交替对动子起到钳位作用.

To release ( a bow, for example ) from flexure or tension.

伸直放开弯曲或拉紧的 ( 如, 弓 )

The flexure hinge is suitable for engineering applications where high displacement and high accuracy are needed.

设计的直圆椭圆复合柔性铰链非常适合于需要大位移、高精度传动的应用场合.

High hardness, resistance to flexure , block and impact.

具有极高的钢性和硬度, 不易弯曲及堵塞、耐冲击.

Analysis of flexure dynamics and study of its control method.

挠性卫星动力学模型分析及其控制方案研究.