The main production including large, medium and small cars, construction machinery dedicated heat sink and cooler.

How to select the suitable heat sink?

如何选择合适的散热片?

For constant fin width, the heat sink with the highest fins has the best thermal performance.

在固定散热片宽度的条件下, 高度最高的散热片有最佳的散热效果.

Therefore, the increase channel height results in lower heat sink temperatures.

因此, 通道高度的增加可导致热沉温度的降低.

The heat-sink method has a fast warm-up time.

渗热法预热快.

However, this parameter has slightly effect on average heat sink temperature.

但此参数对平均热沉温度影响较微弱.

Very high heat sink capacity of the MEPCM was found by DSC method.

最后的dsc热 分析表明了MEPCM具有很高的蓄热能力.

Failure phenomenon: a mistake of the CPU heat sink Nongdiao the Button.

故障现象: 一次误将CPU散热片的扣具弄掉了.

The array can use screws to fix on the heat-sink.

LED面光源能使用螺丝固定于散热器上.

Heat stroke is a life-threatening illness.

中暑是危及生命的严重疾病.

It was so hot yesterday that I had a heat stroke.

昨天太热,我中暑了.

Heat stroke is the most serious disorder disorder linked to hot weather.

中暑是天气炎热的时候最严重的失调症状.

This web site provides information about the symptoms and prevention of heat stroke.

此网站提供有关中暑的徵状及预防的资料.

The system can not only rest, but also can effectively prevent heat stroke.

不仅可以使各项系统得到休息, 还可以有效的防止中暑.

A method of surface metallization of diamond, temper powder diffusion heat treatment, was developed.

研究粉末扩散法使金刚石表面金属化的工艺.

Suitable crosslinking degree and heat treatment can give the system swelling and covering charcoal shell.

加入三聚氰胺可以改善该体系的热稳定性.

Douson possesses the manufacturing facilities forging , welding, machining , heat treatment , assembly, pressure testing and painting.

道森主要产品有:闸阀、截止阀 、 止回阀 、 球阀 、 高温高压阀门和井口设备等.

The mechanical properties of the bolts heat treatment are very high due to strain-induced martensite transformation.

力学性能的提高主要是由于螺栓在拉伸变形时残余奥氏体的应变诱导马氏体相变.

Effects of Cyclic Heat Treatment on Microstructures and Mechanical Properties of TiAl-based Alloy.

“合金组织”译为未确定词的双语例句.

Seat and back wood: Multi-layer plywood after heat treatment, with painting finished.

座、背外壳: 采用优质多层旋切木皮经模具热压成型,面压实木皮, 油漆工艺装饰.

It was shown that the fracture of heat treatment hook caused by creep fracture.

结果表明,该吊具材质存在缺陷,在高温条件下使用发生高温蠕变,最终因沿晶断裂而失效.