Rings: Thin black camagong rings with snake-wood inlays and ivory colored borders.

Ridge-top main hall for the nine Zhong Yan hanging Peak, with clay, porcelain inlays, delicate process.

正殿顶为九脊重檐悬山顶, 配以泥塑 、 嵌瓷, 工艺精美.

Objective : To compare marginal adaptation between teeth and inlays made from three different materials.

目的: 比较三种不同材料嵌体与牙体间的边缘密合度.

INDICATION : Metal-free crowns , veneers, inlays, onlays or metal supported crowns, bridges and implant supra-structures.

顺应症: 非金属 冠,贴面, 嵌体, 高嵌体或金属烤塑冠 、 桥、种植上部构造.

The shutoff valve with cock is to be mounted on inlet side of the backflow preventer.

咨询州和当地规程,确保防回流阀的安装符合有关要求,如地面上适当的高度.

The pump inlet filter program kept clean so as not to exhaust slowed down.

泵进气口的过滤纲保持清洁,以免抽气速度下降.

The figure 85 and 90 M closes at the inlet of the sill cock.

型号85和90M在洒水龙头的进口处关闭.

Install the column in the inlet.

在进样口装柱.

Impeller or both water inlet and outlet pipelines blocked up.

叶轮或进出水管路阻塞.

At the same time air is sucked into the inlet to replace the exhausted air.

同时,外面空气由进气口吸入代替被排出的空气.

Several inlet and outlet methods and specifications.

进出线口有多种方式及规格.

It is an industrial port on Swansea Bay inlet of the Bristol Channel . Population , 188 , 500.

是布里斯托尔海峡的小海湾斯旺西湾的一个工业港口.

Requirement: Air inlet must start to open when down stream pressure is 1.0 PSI or above.

要求: 当下游流体压力在1.0PSI及以上时,空气进口必须开始打开.

They went to a fishing village on a small inlet of the sea.

他们去了小海湾边的一个渔村.

Troffer inlet. Inlet can be set as hidden or not hidden. Inlet properties can be specified.

凹槽输入口. 可将输入口设置为隐藏或不隐藏. 可指定输入口属性.

Its better to put letters at the inlet and outlet.

最好在入口和出口处标上字母.

There is an inlet to a parking lot.

那儿有一个停车场的入口.

Verify inlet and outlet valve to 100 EX 153 are open.

确认进口阀和出口阀打开,连接到100EX153.

A high capacity valve with same inlet feature as standard valve, with thread on the outlet.

这种高性能阀门具有标准阀门相同的进口特性, 在出口端为外螺纹.

A light application of silicone grease to inlet of body bore is beneficial.

在阀体镗孔进口处稍微涂抹硅脂是有益的.

After working, close the gas bottle or inlet valve and adjust pressure valve to be relax.

工作结束后, 应关闭气瓶或管路进气阀门,逆时针旋转调节把手,使之旋到松弛状态.