Procedure: annealed, eddy current detection, alignment, rounded, hydrostatic testing, pickling, product inspection.

Rough machining and semi-finishing of the material in its soft ( annealed ) condition.

在软 ( 退火 ) 工况下材料的粗加工和半精加工.

An abbreviation for " hot rolled annealed and pickled. "

热轧、退火、酸洗的缩写.

Both tensile strengths decrease when annealed at temperature higher than 920 ℃.

℃以上退火,二者强度都出现降低.

Appreciate those who hurt you, because he annealed your mind.

感激伤害你的人, 因为他磨练了你的心态.

Tool steel is generally purchased in the annealed condition.

工具钢通常是在退火后买卖.

The annealed walls froze all the rigid grief of the actress.

上了釉的墙壁凝冻了这位女演员的一切死板的哀伤.

One two-speed annealing furnace Glassware, Kao Hua furnace, favored by the industry.

其中双速玻璃制品退火炉 、 烤花炉, 深受同行业青睐.

Annealing: Heating to 400 ~650 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至400～650℃,在此温度停留1～3小时, 在炉中冷却.

In addition, this kind of material could be machined after annealing treatment.

且该材质具有退火后可切削加工的性能.

The purpose of annealing the metal is to relieve the stress.

给金属退火是为了减少一些应力.

In the paper, the structure of morden continuous annealing furnace was introduced.

文章介绍了现代用于冷轧不锈带钢生产的连续退火炉的组成及结构.

Annealing: Heating to 740 ~770 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至740～770℃,在此温度停留1～3小时, 在炉中冷却.

Annealing: Heating to 800 ~880 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至800～880℃,在此温度停留1～3小时, 在炉中冷却.

The microstructures of Cu-Zn powder under different annealing conditions were studied.

研究了铜锌粉末在不同退火工艺下的显微组织变化.

Annealing: Heating to 710 ~740 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至710～740℃,在此温度停留1～3小时, 在炉中冷却.

Annealing: Heating to 820 ~870 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至820～870℃,在此温度停留1～3小时, 在炉中冷却.

Braising , boiling, annealing, setbacks and struggling all necessary processes of shaping.

炖 、 熬 、 磨练 、 挫折、挣扎,这些都是成长必经的过程.

Annealing: Heating to 780 ~820 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至780～820℃,在此温度停留1～3小时, 在炉中冷却.

To optimize sub-job assignments, two simplified algorithms of simulated annealing are proposed.

为优化子作业指派, 提出了两个简化的仿真退火算法.

The suitable recovery strain annealing temperature was 500 ℃.

适宜的回复应变退火温度为500℃.