Do you perform any type of plyometrics?

Much modern furniture is not solid but uses a sandwich of wood veneer on plywood.

许多现代家具用的并非实心木料,而是在胶合板上镶上一层木板饰面而已.

Where possible, elements were combined as the structural plywood, which is also as the internal finish.

在可能的情况下, 要素相结合的结构,如胶合板, 这也被用作内部完成.

The table is made of plywood covered in teak veneer.

这张桌子是以镶以柚木饰面薄板的合板制成的.

Need large quantities of steel, aluminum industry, iron, plywood and other materials peritoneum.

需要大批量的钢材, 工业铝材, 铁 、 腹膜胶合板等材料.

...a sheet of plywood.

一张胶合板

All plywood shall be exterior and a minimum of 20 mm thick.

所有的胶合板都用于外部,厚度至少为20毫米.

The prediction of the warp of plywood was carried out by finite element method.

翘曲的预测利用有限元素法进行,并与实测值相比较.

This project uses bamboo or plywood, template surface is smooth, tight joints.

本工程采用竹胶板或胶合板, 模板表面光洁平整, 接缝严密.

Pack & Transport: After rust prevention, pack the parts into plywood or iron case for transportation.

对合格产品表面做防锈处理后装入胶合木板箱或铁皮箱后发运.

Especially, the strong joining capacity, flat and smooth nature and durability characterize the plywood products.

尤其是胶合板具有胶合力强 、 平整光滑、耐用等特点,已连续三年被列为“浙江省信得过产品”.

plywood furniture

胶合板家具

With steel, waste plastics, plywood, paper and other imports of a number of franchise rights.

具有钢材 、 废塑料 、 胶合板 、 废纸等多项专营进口权.

Plywood: Manufactured panel made up of three or more thin plies ( layers ) of wood.

胶合板: 用三层或多层的木材薄片胶结在一起制成的复合板材.

PMC type Partner manipulator , column design , with special equipment for picking, inclination and rotation of gears.

支柱式, 配备特殊设备以便抓取, 倾斜和旋转齿轮.

PMC Unwired Networks are transmitted, confirmed and serviced electronically.

PMC无线广播网是电波传输 、 确认和服务的.

In addition, optimum volume and distribution of PMMA cement are still not known.

另外, 聚甲基丙烯酸甲酯黏合剂的最佳剂量和分布目前也不清楚.

Be familiar with plastic and metal materials, know PMMA plus.

熟悉各种塑胶材料及金属, 尤其PMMA塑胶材料者优先.

That means PMMA has changed from polar polymer to non-polar polymer.

对此现象的解释机理提出了“孔洞”与“极性基团断裂”两种假设.

Method: Phacoemulsification with PMMA posterior chamber IOL implantation were performed on 64 eyes of 60 patients.

方法: 对60例、64眼白内障施行超声乳化术,植入PMMA后房型人工晶体.

An abrasion-resistant coating was prepared with organosiloxane on PMMA surface gel method.

其中,表面涂覆 耐磨 涂层是一种方便而有效的方法之一.