Our report was too long so Robert edited it and effectively and efficiently reworded it.

A large area and in serious cases must rework roller.

大面积,严重的情况下必须返修辊筒.

She reworked a lot of her compositions to make them more danceable...

她改编了自己的很多乐曲，使其更适合作舞曲。

Is rework performed for ENIG? If so , what type of rework?

化镍金是否可以重工? 若可以, 是如何重工?

After power supply enter into shutdown, The power supply will rework after AC reset.

电源进入保护状态后, AC重置后电源才能重新正常工作.

[可数名词, 不可数名词]The movie is a reworking of the Frankenstein story.

这部电影是根据弗兰肯斯坦科学怪人的故事改编的。

The rework operation, and the reason for it, should be documented.

再加工操作和其原因应该记录.

Note: Box a lied over an existing box label due to rework is not a defect.

注意: 因翻箱原因而把正确的流程控制标重叠贴在旧的流程控制标上的情况不算瑕疵.

This can avoid business card printing and membership making and other work process rework.

这样能避免制卡和会员卡制作和其他工作流程中出现返工的问题.

I plan to rework the whole song.

我打算把整首歌改编一下。

Staircase stubble shall be reserved, if necessary, for bricklaying break or rework.

砌砖中断或返工拆砖而必须留茬时,应留成阶梯形的斜茬.

So the key to all loosing, sales rework, replace worn copper sleeve, loose gear resize.

于是对所有松动的键 、 销重新加工, 重新更换磨损的铜套, 对松动的齿轮重新调整.

Work with QC to maintain the quality match Pass Rate request rejected goods rework.

帮助质检部分维持产品质量达到通过率的要求,避免产品返工.

Therefore, the necessary time to rework profile was color response status.

因此, 需要每隔一段时间重新制作profile,以适应当时的颜色响应状况.

If done properly, RE can help in reducing requirement changes and rework.

如果做的好, 会减少需求变更和返工.

Record the actual rework effort on the Inspection Summary Report.

在评审总结报告上纪录实际的返工工作量.

Its compact table size makes it a perfect fit in a prototyping lab or rework station.

它结构紧凑,可放置在桌面上,非常适合原型制作或者再加工工作站.

Never finding the quality issue until the last moment, it will cause rework.

而不是等到最后一刻,才发现品质问题, 造成返工.

Implement barcode scan finished product stocking , rework part replacement according to the requirement of QAD system.

按QAD系统要求实施产品扫描、入库 、 返工、插件等操作.

Repair and rework on Transceiver Module assembly and related PCBA.

维修和返工光收发器模块组件,和相关的PCBA板.

Where routine analytical methods are inadequate to characterize the reworked batch, additional methods should be used.

当常规分析方法不足以说明重新加工的批次, 应使用其他的方法.