The vehicle body is used as the carrier in many car assembly parts, so it plays an influential role in the whole bus system, the strength and stiffness of which have a direct impact on the life and safety.

The second layout uses the positon information and parallelizability of the parts and the assembly parts to mark out the assembly again, to realize the process nature and the parallelizability of the assembly.

二次规划利用零部件和子装配体的位置信息、可并行性来对装配进行再次规划，实现装配的过程性和可并行性。

Manufacture cost and efficiency loss minimization as optimal objective function in dimensions and tolerances analysis and computation of the turbine tip clearance and assembly parts application with Monte Carlo random simulated algorithm and gene algorithm.

以制造成本和涡轮效率损失最小为优化目标函数，采用Monte Carlo随机模拟法和基因遗传算法，分析计算了涡轮间隙尺寸公差和装配组成环的尺寸公差分配。

At present, GM generator sets should be supplied rotor, stator, brush and other assembly parts in parts and components method, all of which should be assembled by complete factory.

目前，通机发电机的供货范围主要包括定子、转子、电刷、及其它附件，以电机企业散件供货为主，整机企业成套自行装配。

In the first, scan the assembly parts using the laser scanning to acquire scanning data. Through the scanning data handling and analysis, the key features are extracted and the interference conditions are calculated.

首先采用激光扫描仪扫描零部件获得扫描数据，通过扫描数据处理分析，从中提取关键特征或根据其重构模型计算零部件的干涉情况，进而指导后续的装配处理。

When manufacturers and suppliers signing assembly parts supplying contracts, the assembly parts' target cost made by manufacturers, as an important constraint condition, influences the main decision variables in contracts.

在制造商和供应商签订零部件的供应契约时，制造商制定的零部件目标成本作为一个重要的成本约束条件，影响契约中主要决策变量的确定。

During the digital virtual design of the complex constructed mechatronics products, designers usually need to use other finished products ( FP, including assembly parts, subassembly parts and single parts).

在复杂机电产品的数字化虚拟设计中，设计人员经常需要使用其它现有产品的零部件（简称成件，包括装配体、子装配体和单个零件）。

There are fork blank map, fixture assembly parts diagram and mapping how to ensure the technical conditions fork is the most important process, and fixture also plays a vital role.

还有拨叉毛坯图、零件图和夹具装配图的绘制，如何保证用拨叉的技术条件是加工过程最为重要的问题，而夹具也起着至关重要的作用。

The body frame is an important carrier of the car assembly parts, its just the merits of the strength of the service life of the vehicle and safety have a critical impact.

车身骨架是汽车总成部件的重要载体，其刚强度的优劣对车辆的使用寿命及安全性有着至关重要的影响。

It will affect the elastic of the film better if we add a recess. See how it will affect the assembly parts, and then make your decision.

此处加一个凹槽，胶片的弹出效果会更好一些，试模后看装配的效果再做修正。

The extending machine cabinet without side plate is equipped with assembly parts equipped with assembly parts, which are used for combination with the adjacent cabinet.

不带侧板的扩展机柜都带有与相邻机柜并柜安装所需要的安装配件。

The installation of the miter gate for Three Gorges Permanent Lock has the characteristics of big construction difficulty, high installation accuracy requirements and many assembly parts.

三峡永久船闸人字门安装具有施工技术难度大、总装精度要求高、安装部件多而杂等特点。

Two methods were introduced to serialize product in this paper. The methods using UG spreadsheet control assembly parts variation to get different assembly parts and achieve serialization.

介绍了两种使用UG电子表格快速实现产品系列化的方法，使用这两种方法可以在顶级装配件中控制装配组件的变异，得到不同的装配体，实现产品系列化。

The bearings at the both ends of the rotating shaft are spherical bearings, and the two bearing seats are well processed assembly parts.

两端的轴承是球面轴承，两个轴承座是已经加工好的组装件。

With the rapid development of Office Automation assembly parts industry and the market is becoming more mature and due to the fluctuations of the global economics.

随着办公自动化设备行业的快速发展，市场的不断成熟，以及全球经济变化的影响。

The automatic creation of disassembly direction is key problem of disassembly analysis, depended on the fitting surface of assembly parts.

拆卸方向的自动生成是拆卸分析中的重要问题，它仅依赖装配体的配合面。

Present an analysis and assessment model for the economic characters of product disassembly and recycle on part/ assembly parts/ product three levels.

从零件、组合件和产品三个层次进行了产品拆卸回收的经济性分析，并提出了相应的评估模型。

The technological parameters of cell components including positive and negative plates, electrolyte, and assembly parts are introduced.

详述了正负极板、电解液、电池零部件的设计思路及工艺参数。

Its principle is introduced in detail. Using relation parameters, the parametric model is built for complex assembly parts.

文中着重阐述了该设计方法的原理，即采用关联参数建立多个组件间的关联可以实现复杂组件的参数化建模。

Finally, the recipe used to manufacture inner assembly parts of automobiles is defined.

确定了用其制作轿车门立柱、门内基板等内饰件的配方。

Prelimiary Exploration to the Surface Assembly Parts Design

表面组装件设计初探