Methods: to mave use of arrhythmic rat model.

Arrhythmic Analysis of 370 Heart Diseases in Elderly

370例老年心脏病的心律失常分析

Old Patients' Arrhythmic Characteristics and Treatment by TCM

老年人心律失常特点及中药治疗

The analysis of characteristic about Acupuncture for treatment of arrhythmic in recent 15 years

近15年心律失常的针灸治疗特点分析

But a camshaft driven directly by the crankshaft gear turns in the opposite direction.

但是凸轮轴被曲轴齿轮直接驱动,其将在相反方向上转动.

An example of engine crankshaft was used to illustrate application of the new method.

以发动机曲轴部件为例,叙述了设计流程的应用过程.

The curative effect of 325 cases has proved that the treatment of three arris needle with blood out for such diseases is superior to other therapies for it is efficacious, convenient and fit for spreading.

用三棱针出血治疗，方便适用，且适宜推广，经325例疗效观察明显优于其他疗法。

Fatigue specimens of the details were made in accordance with the patterns of the arris weld. The fatigue resistance curves and relevant statistical parameters are obtained through the analysis of the fatigue experiments and the FEM analysis.

通过疲劳试验研究和有限元分析，确定了该细节的疲劳抗力曲线和有关的统计参数，并建立了棱角焊缝构造细节疲劳破坏模型。

A novel microstrip slot antenna was presented here, which located on the arris of polyhedron and was fed by microstrip line inside the polyhedron.

本文提出了一种新型的、位于金属多面体棱上、由多面体内部微带线馈电的缝隙微带天线。

It has conoid fruit shape and five sticking out arris. Its fruit form index is 0.90-0.98. The average fruit mass is 210 g.

果实圆锥形，五棱突起，果形指数0.90～0.98，平均单果质量210g，果实全面浓红，色相片红；

The strokes of the characters of the vehicle license tag are convex and stiff, with very clear arris.

本车号牌的字符笔划凸出挺拔，棱角极为分明；

In this paper, the fatigue problem of beam joints of steel bridges is studied through examining the arris weld.

本文研究了钢桥钢梁中棱角焊缝构造细节的疲劳问题。

Fatigue specimens of the details were made in accordance with the patterns of the arris weld.

依据钢桥设计中所采用的钢梁棱角焊缝构造细节形式，模拟设计制备了该细节的疲劳试件。

An approach to inside arris defects of slight stretch reduced pipes micro-optics

钢管微张力减径内棱缺陷的探讨

Research on Quartz Wet Etching and Flatting Process of Sidewall Arris

石英湿法腐蚀及侧壁晶棱修平工艺研究

NC Processing of Three-Arris Aperture Based on Master CAM and UG

基于MASTER CAM和UG的三棱孔的数控加工

Care shall also be taken not to damage moulding and arris edges.

同时，应注意不要损坏模缘和斜边。

Research on date process method of automatic designing arris formed turning tool CAD systems

棱体成形车刀CAD自动设计数据处理的研究

Research on Density of Two Kinds of Particles with Sharp Arris Form

尖棱状两组分颗粒堆积密度的研究

Design and study on arris formed turning tool CAD system

棱体成形车刀CAD系统设计与研究

But saying that the arriver leaves all problems behind would be an error.

可是若要说成功者把一切难题都抛在了身后，那就大错特错了。