Because the hardness number obtained depends on the applied load, Knoop test restless should always cite the load used.

In terms of geometry, the defining parameters are the body width, hole diameter and the location of the applied load.

在条款几何，确定参数是身体的宽度项，孔直径和地点应用负载性。

Elastic deformation is that part of the deformed material which when the applied load is removed would spring back to its normal shape.

弹性变形是材料变形部分在去除载荷后可以恢复到原来的形状。

At zero applied load, the crack is closed along the perimeter of the specimen but open in the center.

在施加零载荷处，试样周边的裂纹是闭合的，而中心则是张开的。

The result shows that the optimal value of filler metal thickness exists and the residual stress decreases with the applied load increasing.

结果表明，钎缝厚度存在最佳值，在一定范围内钎焊压力增大，残余应力减小。

The coating layer hardness depends not only on the coating material, but also on the applied load and coating layer thickness.

涂层硬度不仅取决于涂层材料本身，同时还与试验负荷和膜层的厚度密切相关。

The fracture mechanism of PVC under applied load and the cause of' stress relaxation under high speed tension load are discussed.

探讨了PVC在外加载荷作用下的断裂过程和高速拉伸的应力松驰现象的产生机制。

Moreover, the applied load and sliding cycles directly determine the wear property of the Si ( 100).

此外，外加载荷和扫描循环次数直接决定Si（100）表面的耐磨性能。

The question on power revisal and suddenly applied load of charged diesel of generating set with internal combustion engine

内燃发电机组增压柴油机的功率修正和突加负载问题

The linearity between the electrical resistance change and the applied load was good for the carbon fiber reinforced cement based material.

碳纤维水泥基材料的电阻变化与所受荷载呈良好的线形关系；

Experimental Achievement of Applied Load, Confirmation of Compressive Modulus Index of Subgrade Soil by Reversed Deduction Method

应用静载荷试验成果反演地基土压缩模量指标

Analysis of Applied load and Displacement of More Than One Span Steel Structure of Portal Frames With and Without Hinges

多跨无铰与有铰钢结构门式框架承载力及位移的对比分析

Then the dynamic responses of the plate subjected to suddenly applied load and harmonious load are analyzed.

对弹性半空间上方板在突加荷载及谐和荷载作用下的动力响应进行了时程分析。

The Influence of the Applied Load on Shape Recover and Phase Transformation in a Ti-Ni Alloy

附加载荷对Ti-Ni合金形状恢复及相变的影响

This formula gives a theoretical basis for the calculation of applied load in bar stress severing method.

该公式为应力断料时的预荷力计算提供了理论依据。

By increasing gradually the applied load, the damage propagation and the ultimate strength are obtained.

层合板的破坏扩展及极限强度通过逐渐增加载荷迭代求得。

Dynamic plastic response of beams subjected to bending and torsion under suddenly applied load

弯扭联合作用下梁对突加载荷的塑性动力响应

A frost heave model based on moisture temperature and applied load interaction in frozen soil

基于冻土水分温度和外荷载相互作用的冻胀模式

With increasing the applied load and sliding velocity, the friction coefficients decrease.

随着载荷和摩擦速度的增加，摩擦系数减小。

Thermal Transient Behavior of Thrust Bearing under Step Applied Load

阶跃载荷扰动条件下推力轴承热瞬态过程研究

Application of sudden applied load method in blast simulation

突加载荷法在模拟爆破中的应用