The paper expounds the necessity, possibility, and effect of the participation of human capital in the distribution of enterprises'income from the angle of capital gains.

The capital structure is a mostly factor that affect the governance structure, the author study any way to perfect governance structure from the angle of capital structure.

资本结构是影响公司治理结构的一个主要因素，本文从资本结构的角度对完善公司治理结构进行探讨。

International Capital Flows and Financial Crisis Prevention: The Analyzing Angle from Capital Flight

从资本外逃角度看我国金融危机的防范

The Optimum of State-owned Corporate Governance from the Angle of Capital Structure

从资本结构视角看国有企业治理结构的优化

CSF-ventricular catheter with right angle clip to guard against catheter kink and co-mpression;

脑室导管，带有定位固定钮，防止导管扭曲及受压；

The joint shapes suited for CO_2 welding are designed Under which weld quality is still assured but the groove angle and size of fillet weld are reduced. By ways of these the productivity is increased and cost decreased.

提出了适合于CO2焊特点的接头形式，该接头形式在保证焊接质量前提下，减小了对接焊的坡口角度及角焊缝的焊脚尺寸，可以提高焊接生产率，降低成本。

Effects of 45 ° Chamfer Angle and Fillet on Shrinkage Porosity ( hole) in Investment Castings

45°倒角与圆角对熔模铸件缩松（孔）的影响

This paper describes the causes of angle bump of float glass when conveyed at the cold end while being longitudinally cut on the production line.

探讨了浮法玻璃在冷端输送过程中，玻璃板在主线上纵向掰断并分开所产生的两块玻璃尾端碰角的现象。

The procedure of enlarging deflection angle of float glass is analyzed and the factors of affecting the deflection angle is found out.

分析了提高浮法玻璃光学变形角的过程，总结了影响浮法玻璃光学变形角的因素。

The test result shows that the method is better than traditional method for measuring the zebra angle of float glass.

实验结果表明，该法优于传统的浮法玻璃斑马角测量法。

The measurement of the zebra angle of float glass with virtual Moire fringe method

虚拟莫尔条纹技术测量浮法玻璃斑马角

Procedure analysis of enlarging deflection angle of float glass

提高浮法玻璃光学变形角过程分析

The muscular function change in the lower extremity according to the angle of joint was assessed.

评定下肢肌肉功能随关节角度变化而发生的变化；

Ultrasonic Flaw Location of Angle Welded Joint with Inserted Take Over

插入式接管角接接头超声波探伤缺陷定位

A Study of Relation Between Fractal Dimension and Frictional Angle of Joint Profile

岩体节理形貌的分形维数与摩擦角的关系研究

Quality control and test of T-joint and angle welded joint in construction steel structure

建筑钢结构T型及角接焊接接头的质量控制与检测

The profile butt-welding is the most typical welding structure of ship welding, it includes the butt welding of outer plate, the butt welding of panel, the butt welding of web plate, the angle joint of outer plate and web plate.

型材对接焊是船舶焊接中最典型的焊接结构，包含了外板的对接焊缝、面板的对接焊缝、腹板的对接焊缝和腹板与外板的角接缝四条焊缝。

Based on this, the paper selects typical welding joint in the shipbuilding process, mainly including the butt welding of web plate, the butt welding of panel, the butt welding of plate, the angle joint of plate and web plate.

基于此本文选取船体建造过程中典型的焊接对接接头，该焊接接头主要由平板的对接、腹板的对接、面板的对接以及腹板和平板的角接组成。

It is presented that the differential pressure orifice flowmeter and the angle joint differential pressure measuring structure used in the test are the applied technologies of H2O2/ kerosene engine test.

提出了压差式孔板流量测量和角接式取压结构在过氧化氢/煤油发动机试验中的应用技术。

The machine is mainly used for extrusion and connection of 45 ° seam casement window with angle joint structure.

门窗单头组角机主要用于角码结构的平开门窗45°接缝的挤压联结。

The structural type of T-joint and angle joint in construction steel structure were expounded, the test characteristics of these structural type were explored, and the key point of control and test method for detecting flaw by supersonic was proposed in this paper.

本文论述建筑钢结构T型接头及角接接头的结构型式，探讨了这种结构型式的检测特点，提出了用超声波探伤的检测方法及控制要点。