From the investigations, lack of nitrogen and phosphorus, oxygen deficiency in aeration basin of SBR, high concentration of sulfide in the wastewater is found.

By the experiment and actual engineering of strengthen mass transfer, which based on the Inertia Effects Theory, the basic theory of aeration basin technology kinetics was deeply studied.

依据惯性效应理论进行污水好氧处理的强化传质试验及工程实践，对曝气池工艺动力学的基本理论进行深入研究。

A Study on the Treatment of Dyeing Effluent With Push-flow Type Activating Sludge of Aeration Basin Working With little or Without Oxygen

推流式活性污泥曝气池微氧／缺氧状态运行处理废水的探讨

The comparing of pusher aeration basin and completely mingled basin

推流式与完全混合式曝气池的比较

In condition of increasing pH of aeration basin at 8.5 or so, sludge bulking can also be controlled without pre-aeration.

提高曝气池的pH值在8.5左右的情况下，不经过预曝气，也可以控制已经发生的污泥膨胀。

Physiological Characterization of Coccobacillus Bacterium Causing Foam in Aeration Basin

引起曝气池产生泡沫的球杆菌生理特性研究

In the range of experiment, the oxygen transfer coefficient KLa has a directly proportional relationship with the aeration degree increasing;

结果表明，在实验范围内，随着曝气量的增大，氧传质系数呈直线上升；

The theoretical analysis on sludge concentration identification of mixtures in aeration tank

曝气池混合液污泥浓度确定的理论分析

Analysis of running of sewage treatment with Aeration Tank

关于氧化沟法污水处理的运行浅析

Real-time Forecast of DO Concentration in Aeration Tank Using ANFIS Model

以ANFIS模型实时预测曝气池溶解氧浓度

Study on Operating Parameters of Aeration Tank in Aerobic Selector Process

好氧生物选择器工艺中曝气池运行参数的研究

Experimental study and numerical model of gas-liquid two-phase flow in aeration tank

曝气池中气液两相流的数值模拟与实验研究

Optimize method to design the structure of aeration tank

推流式曝气池的结构优化方法

The Parameter Evaluation of Dynamic Model for an Aeration Tank

曝气池动力学模型的参数估值

New method of design calculation of aeration tank

曝气池设计计算的新方法

Particle Image Velocimetry System Development and Application in the Aeration Tank

粒子图像测速系统开发及在曝气池流场中应用

Instrument for monitoring weight and grade of uranium ore in aerial tram of cableway

索道铀矿斗计量监测仪

With the rapid increasing of domestic and overseas aerial cableway, the monocline circulating detachable grip passenger cableway has become the main stream of cableway. For the low invests of the construction, it is affected slightly to the environment, and widely applied in various fields.

随着国内外架空索道产业的快速增长，单线循环脱挂式客运索道逐渐成为发展的主流，因为索道的基建投资少，对环境的破坏程度小等优点，广泛的应用于各个领域。

This paper is based on the theory of accurate segmented catenaries calculation, adopts the method of modular design and uses Visual Basic 5.0 version to program codes to develop software, which accomplishes the corresponding functions of aerial cableway analysis and calculation.

本文以分段悬链线精确计算理论为基础，采用模块化设计方法，使用VISUAL BASIC5.0版本编写程序代码，设计并实现了具有相应功能的送变电运输架空索道计算软件。

To Design and Improve Manned Aerial Cableway

对架空乘人车设计及改进措施的探讨

Improvement of end straining system of aerial cableway

索道尾部拉紧系统的改进