President Nicolas Sarkozy declared last year that the burqa was " not welcome on French soil "

France is likely to come in for much outside criticism for its burqa ban.

法国很有可能会因为其布卡(burqa)禁令遭受大量的外部批评.

The exactness of the method is verified by the calculated illustrations of milling cutter and burr.

文中的铣刀及旋转锉的计算实例验证了本文的算法正确.

Colonel Burr was arrested by order of President Thomas Jeffson and charged wITh treason.

根据汤姆斯·杰弗逊总统的命令,伯尔上校被指控犯叛国罪被捕.

Mill groove, hole and panel edge are clean, tidy with no burr on surface.

铣槽 、 孔及板边、表面洁净 、 整齐、无毛刺.

The height of burr of the usual blanking is in the table 2.2.

正常冲裁中允许的毛刺高度见表2.

Oh and before I forget , contact Gregory Burr and a meeting for tomorrow afternoon.

噢,先交代你一声, 你和格雷戈里·柏尔联络一下,约他明天下午见面.

Getters generally don't get happiness ; Givers Burr.

获得快乐的人通常不是接受者而是给予者.

The mechanical handling of the compression or injection molding of rigid plastic products of Burr.

本机械处理压缩或射出成型之热硬性塑胶制品的毛边.

The House ended up choosing Thomas Jefferson over Burr.

众议院最终选择了托马斯·杰斐逊而不是阿龙·伯尔.

Problems such as drill life exit burr and machined surface roughness etc.

对采用超声波振动钻削微小孔时钻头的寿命、出口毛刺和加工表面粗糙度等问题进行了研究.

Cut tube end square, ream, burr and size.

成直角切割管道端口, 铰除杂质, 去除毛刺,裁好尺寸.

Burr refers to the removal of bleeding edge, is the binding terms.

飞外指切除不入血外位, 乃装订术语.

An automatic radiusing machine was developed to eliminate the burr or edge fin of bar end.

为了清除棒材在生产过程中产生的端部毛刺、飞边等缺陷，研制开发了棒材自动倒角机。

And the basic foundation of prediction and control of metal cutting burr is established.

进而,为实现切削毛刺的预报与控制开辟了新途径.

The burr is one of the common phenomena occurring in metal cutting.

毛刺是金属切削加工中产生的常见现象.

Oh, and before I forget , contact Gregory Burr and arrange a meeting for tomorrow afternoon.

社:噢, 先交代你一声, 你和格雷戈里·柏尔联络一下,约他明天下午见面.

Burr was indicted for murder, but the charges were later dropped.

安伦波被控以谋杀罪, 但是这个指控最后被撤销了.

No burr, flash, scratch , flow mark, bright speck, shrinkage defects etc on the surface of product.

外观表面不可有毛边 、 刮痕 、 流痕 、 亮痕 、 缩水等不良现象.

Burr formation is an important factor of influence to metal cutting quality.

毛刺是影响金属切削加工质量的主要因素之一.

Cut tube end square . Ream, burr and size.

先沿着垂直方向切割管道, 并修整 、 去除毛刺,测量管径.