An Experimental Investigation of Heat Transfer in Rotating Coolant Channel

Chemical Function of Water-based Coolant for Optical High-speed Fine Grinding

水基型光学高速精磨冷却液的化学作用

In this paper, the choice of physical coolant and chemical coolant for pyrotechnic gas generator, cooling methods, the configuration design of cooling cell and numerical simulation of cooling course are reviewed.

本文就冷却剂的选择、使用方式、冷却单元结构设计及冷却过程数值模拟进行了综述。

In this article, the main influencing factors on condensation heat transfer include air flow rate, coolant flow rate, coolant inlet temperature and mixed gas velocity.

在本课题中，影响传热过程的因素主要有空气含量、冷却水流量、冷却水温度及混合气气速。

Check air filter and coolant level;

检查空滤芯和冷却剂液位；

The method to machine the parts made of stainless steel which adopts cooled air as coolant and a little plant oil as lubricant, is studied.

对采用冷风冷却微量植物油润滑切削加工不锈钢零件的方法进行了研究。

Determination of Electron Density in Ar air Mixed Coolant Gas ICP

小功率空气-氩气混合气冷却ICP中电子密度的测定

The leading and trailing inserted tube for air coolant on an aeroengine is a thin wall component, it is made of Inconel 625 alloy sheet ( thickness 02mm).

航空燃气涡轮发动机前后冷气导管是一薄壁（δ＝0.2mm）零件，材质为Inconel625高温合金。

Effects of air coolant injection on cascade surface pressure distribution

冷气喷射对直叶栅型面压力分布影响的实验研究

Check coolant quantity, engine oil quantity in oil pan and fuel injection pump, check "three leakages" situations.

每天进行日常维护，检查冷却水量、油底壳及喷油泵内的机油量、检查“三漏”情况。

Investigations on the effects of various experimental parameters indicate that fuel composition, engine load, air/ fuel ratio, temperatures of coolant and oil, and testing time significantly affect the sludge formation.

指出燃料组成、发动机负荷、空燃比、冷却液和机油温度以及试验时间是影响油泥生成的重要因素。

Brief introduction on recovery treatment of deteriorated lubricant and coolant oil

陕北石油秩序简述润滑、冷却用油劣化后的再生处理

Mineral oil is an excellent type of dielectric liquid with high coolant capability and low cost, it has played important roles as both insulators and coolant liquid in oil-immersed high voltage equipment more than a century.

矿物油兼具良好的电气绝缘、冷却性能以及低廉的成本，在油浸绝缘高电压设备中已有一个多世纪的应用历史。

Studies on Direct-contact Vaporization between Coolant and Hot Viscous Liquid in Analogy Hele-Shaw Cell

似Hele-Shaw盒中冷剂与高粘热液相间直接接触汽化传热的研究

Heat Transfer in Process of Vaporizing Cooling by Introduction of Volatile Liquid Coolant into Viscous Liquid

热粘液中引入挥发性冷剂进行汽化冷却的传热研究

Cap on the opening in the top of a radiator through which a coolant liquid can be added. UPPER LIFTGATE OPENING TRIM

水箱上部开口的一个帽儿，从这里可以加上冷冻剂。上部升降闸门开口装饰

A Model of Film Boiling Thermal Hydraulics on a Hot Particle Dropping in Coolant Liquid

膜态沸腾下高温颗粒热动力特性理论分析

Thermo Hydraulics Characteristic Around a High-Temperature Particle Dropping in Coolant Liquid

高温颗粒沉降冷液热工水力特性

An Experimental Investigation of Drag Characteristic of A Hot Particle Moving in Coolant Liquid

高温小球在冷却剂中运动阻力特性的研究

The transpiration control problem is investigated with water as the coolant.

本文采用水作为发汗剂研究了发汗控制问题。

In this paper, an automatic control system for ethylene oxidation silver catalyst evaluation unit was reformed based on R-150 modular automation system, A new set of oxidation reactor with highpressure water as coolant was rebuilt.

在采用R150自动控制系统的基础上，对乙烯氧化生产环氧乙烷催化剂的评价中试装置的控制系统进行了改进，并增建一套采用高压水撤热的反应系统。