The high chromium cast iron flux cored wire is an important kind of hard facing material with good cost performance and excellent anti-abrasive wear performance, which is widely used in metallurgy, mining, cement, construction machinery, dredging equipment and many other fields.

Non-lubricated, tapered plug assures tight seal with low breakout torque. Constructed of hardened materials with optional hard facing.

无润滑，锥形阀塞确保紧密密封，并且具有很低的启动扭矩。有硬化材料构造而成，配置备选硬面。

The main performance indexes on 1# hard facing rust inhibiting oil were verified and its process was determined.

对1号硬膜防锈油的主要性能指标进行验证并确定其使用工艺。

Dual-Metal Hard Facing Heap Weld Technology of Recovering Hot Forging die

修复热锻模的双金属堆焊技术

The results show that hard facing layer have high hardness, anti wear performance and suitability.

结果表明，圆点状堆焊层具有较高的硬度、耐磨性及适用性。

Especially to the stripping of SLA prototype, use the similar principle similar to solubility parameter of principle of polarity, have confirmed that corrode and destroy the organic solvent of SLA prototype, thus the difficult problem stripped after solving the chemical copper facing of SLA prototype effectively.

特别是针对SLA原型的剥离，运用极性相似原则和溶解度参数相近原则，确定了有效腐蚀和破坏SLA原型的有机溶剂，从而解决了SLA原型化学镀铜后剥离的难题。

Treatment of copper facing water of petroleum drilling rod

石油钻杆刷镀铜废水处理

Finally, some comments on the safety of the facing gravel sand dam were presented.

文末就面板砂砾坝的有关安全技术提出了意见，这对未来的坝工将是有益的。

Northern China is facing another sand storm.

又一场沙尘暴来袭华北等地。

The effective coal dust content of molding sand should be determined according to the factors such as the quality of the coal dust, casting size and thickness, pouring temperature, facing sand or unit sand, and so on.

决定型砂中的有效煤粉含量应根据煤粉质量的优劣、铸件大小和厚薄、浇注温度、面砂或单一砂等因素。

Application of Facing Sand within Graphite on Bronze Impeller Casting

含石墨面砂在青铜叶轮铸件生产中的应用

The reclamation sand can be directly used for facing sand.

获得的再生砂可直接用于面砂。

Post-pot facing process and cutter

后锪孔工艺及其刀具

The computer aided design of the variable position facing cutter assisted examination

可转位端铣刀的计算机辅助设计

At present, W and W alloy are considered as a promising candidate for plasma facing material ( PFM) of International Thermonuclear Experimental Reactor ( ITER) because of their high thermal conductivity, high melting and low sputtering erosion.

目前，钨和钨合金由于良好的热传导性，高熔点，低溅射率等优良特性被普遍认为是最有希望成为国际热核聚变实验堆（ITER）等离子体面壁材料的候选材料之一。

Tungsten ( W) is presently a so good candidate plasma facing material for nuclear fusion reactor because of its high melting point, high thermal conductivity, low sputtering yield and low tritium retention capability.

钨具有高熔点、高导热、低溅射产额和低氚滞留性能，是核聚变堆最有希望的面对等离子体第一壁材料。

This paper recommends using GRC as facing material and mineral wool as thermal conservation material in manufacturing curtain wall form GRC exterior wall thermal conservation plank system.

本文介绍了采用GRC作面层材料，岩棉作保温材料，研制出幕墙式GRC外墙外保温板节能体系。

As a candidate plasma facing material, Graphites are widely used as the armor material for first wall and divertor plate in current tokamak devices.

石墨被广泛用于当今的托卡马克装置中，作为真空室第一壁和偏滤器靶板的保护材料，也是未来聚变堆的一种候选面对等离子体材料。

Development of expanded pearlite color glass compound facing material

膨胀珍珠岩&玻璃彩色复合饰面板的研制

Gas desorption behavior of plasma facing material for tungsten coating

钨涂层面对等离子体材料出气性能的研究

Behavior of several plasma facing material candidates under thermal

面对等离子体材料铍的抗热冲击性能