New Method to Calculate Initial Asphalt Binder Content for Stone Matrix Asphalt

Relationship between resin binder content and properties of automotive friction materials

树脂粘结剂含量对汽车摩擦材料性能的影响

Different body molding pressure, optimal value ceramic binder content is different.

不同的坯体成型压力下，陶瓷粘结剂含量最优值是不同。

SiC powders were treated by spray pelletization, and the influences of processing conditions and binder content on the crushing behavior of SiC granule during compaction were investigated.

采用压力喷雾造粒的方式对SiC粉体进行喷雾造粒处理，研究了喷雾造粒过程中工艺条件和浆料中粘合剂含量对成型过程中粉料颗粒破碎行为的影响。

Experimental results indicate that the optimized binder content and ingoing temperature of airflow are 50 ml/ kg and 240 ℃, respectively.

SiC粉体在喷雾造粒时最佳粘合剂含量和进口热风温度分别为50ml/kg和240℃。

The animal glue is used to make mold and core sand binder, and infrared spectrum ( IRS), chemical element analysis, and thermal lost-weight analysis are used to explore the recycling property and reused process of glue-based mold and also its core sand environmental influences.

采用近乎属于固体工业废物的动物胶做型芯砂黏结剂，用红外光谱分析、热分析及元素分析等方法探讨了其对环境的影响以及所制造型芯砂的回用性能、再生工艺等。

Method and application of manufacturing hydroxyl acid from used oil for mold and core sand binder is introduced. These oil include motor oil, insulating oil, diesel oil, turbine oil, cylinder oil, etc.

介绍了一种用机械油、绝缘油、柴油机油、汽轮机油、汽缸油等各种废油制作羟基酸的方法及其作为型（芯）砂粘结剂的应用。

The CO 2 phenolic resin binder system is a new molding and core making binder for cold box process, which has many advantage properties.

CO2固化碱性甲阶酚醛树脂粘结剂是一种新型的造型、制芯材料。

Method and Application of Manufacturing Hydroxy Acid from Used Oil for Mold and Core Sand Binder

废油制作羟基酸型（芯）砂粘结剂的方法与应用

JD-1 Foundry Core Binder of Complexed-Crosslinked Type

JD-1型铸造用复合交联型高分子粘结剂的研究

Study on Foundry Core Binder of Expansion Intertexture of Polished Glutinous Rice Powder

铸造用改性糯米粉砂芯粘合剂的研究

Research on New Core Binder YF

芯砂用新型YF粘结剂的研究

They will gather the weeds and bind them up in bundles and burn them.

他们会将稗子蓐出来，捆好后，用火烧了。

In order to readjust and optimize the service industry structure of Yanbian region, we shall set scientific development as guideline and bind up in building up modern service industry to gradually replace the conventional service.

因此，要以科学发展观为指导，围绕建设现代服务业发展的目标，使现代服务业逐步取代传统服务业的位置，从而调整和优化延边地区服务业的产业结构。

As measured in the experiments with binaural presentation of sound, the mean differential threshold of sound source position in terms of binaural intensity difference was 0.70 db, and that in terms of binaural phase difference-28.5 μ sec.

用双耳强度差法测得的声源位置辨别阈平均为0.70分贝.用双耳时相差法测得的声源位置辨别阈平均为28.5微秒。

Based upon recent researches done on binaural sound localization algorithms in the Hydraulic Systems Laboratory at Hebei University of Technology, this research sought to apply localization of sound to automatically localize the hydraulic system in a small laboratory environment.

基于在河北工业大学液压试验室所进行的一些双麦克风定位试验研究，本文试图寻求一种在小试验环境里，在电液系统中应用声源定位原理的方法。

This article describes the basic method of binaural sound reproduction through loudspeakers, the problems arising from it and some ways to solve the problems.

本文简述扬声器重放双耳信号的基本方法、带来的问题和一些解决问题的途径。

Finally the binaural sound signal is filtered by the HRIR on the continuous sphere space.

最后利用连续球面空间上的HRIR对双耳信号进行滤波处理。

Binaural Sound Localization Based on Detection of Multi-band Zero-crossing Points

基于分频过零点探测的双耳声源定位

Therefore the experiments provide an example to validate the hypothesis that the binaural masking effect is the result of the high level auditory system processing binaural sound signal, and it also hints that by using stereophonic, reproduction speech intelligibility can be improved in communication systems.

因此文中的实验为双耳掩蔽是听觉系统的高层对双耳信号处理这假设提供了例证，并提示通信系统采用立体声作可提高重发语言清晰度。

The results were analyzed by the combination of better-ear contribution, binaural effect and etc.

文中进一步指出掩蔽阈值的降低是较优耳效应和双耳效应等的综合作用造成的。