Properties and Engineering Application of AFS Stabilized Fine-grain Soil Binder

Using the blend of epoxy resin and phenolic resin as binder, whose functional group molar ratio was 1:3, and the total resin content was 17wt%.

粘结剂使用EP和PF的共混树脂，其官能团摩尔比为1：3，总树脂含量为17wt%。

Research on sodium hydroxide hydrolysis corn straw as briquette binder

氢氧化钠水解玉米秸作型煤黏结剂的研究

The manufacture of corn starch binder is studied, which is made in hot state and used in room temperature, and the factor affecting its binding strength and compare the binding property with water glass.

本文研究了热制冷上机玉米淀粉粘合剂的制造工艺与影响其粘合强度的因素，并与水玻璃做了粘合性能的比较。

Study on the reserved period for oxidated corn starch binder

氧化玉米淀粉粘合剂贮存期的研究

Manufacturing and property of corn starch binder and Study on binding strength

玉米淀粉粘合剂的制备、性能及粘合强度的研究

It was shown that, complex figure W-skeleton with homogeneous porosity distribution can be obtained with 35% ( in volume) binder content and high temperature.

结果表明，添加35%体积分数的粘结剂并在压制过程中提高压制温度会明显改善钨骨架孔隙度分布的均匀性；

New Method to Calculate Initial Asphalt Binder Content for Stone Matrix Asphalt

沥青玛蹄脂碎石初始沥青用量的计算方法

Relationship between resin binder content and properties of automotive friction materials

树脂粘结剂含量对汽车摩擦材料性能的影响

Different body molding pressure, optimal value ceramic binder content is different.

不同的坯体成型压力下，陶瓷粘结剂含量最优值是不同。

SiC powders were treated by spray pelletization, and the influences of processing conditions and binder content on the crushing behavior of SiC granule during compaction were investigated.

采用压力喷雾造粒的方式对SiC粉体进行喷雾造粒处理，研究了喷雾造粒过程中工艺条件和浆料中粘合剂含量对成型过程中粉料颗粒破碎行为的影响。

Experimental results indicate that the optimized binder content and ingoing temperature of airflow are 50 ml/ kg and 240 ℃, respectively.

SiC粉体在喷雾造粒时最佳粘合剂含量和进口热风温度分别为50ml/kg和240℃。

The animal glue is used to make mold and core sand binder, and infrared spectrum ( IRS), chemical element analysis, and thermal lost-weight analysis are used to explore the recycling property and reused process of glue-based mold and also its core sand environmental influences.

采用近乎属于固体工业废物的动物胶做型芯砂黏结剂，用红外光谱分析、热分析及元素分析等方法探讨了其对环境的影响以及所制造型芯砂的回用性能、再生工艺等。

Method and application of manufacturing hydroxyl acid from used oil for mold and core sand binder is introduced. These oil include motor oil, insulating oil, diesel oil, turbine oil, cylinder oil, etc.

介绍了一种用机械油、绝缘油、柴油机油、汽轮机油、汽缸油等各种废油制作羟基酸的方法及其作为型（芯）砂粘结剂的应用。

The CO 2 phenolic resin binder system is a new molding and core making binder for cold box process, which has many advantage properties.

CO2固化碱性甲阶酚醛树脂粘结剂是一种新型的造型、制芯材料。

Method and Application of Manufacturing Hydroxy Acid from Used Oil for Mold and Core Sand Binder

废油制作羟基酸型（芯）砂粘结剂的方法与应用

JD-1 Foundry Core Binder of Complexed-Crosslinked Type

JD-1型铸造用复合交联型高分子粘结剂的研究

Study on Foundry Core Binder of Expansion Intertexture of Polished Glutinous Rice Powder

铸造用改性糯米粉砂芯粘合剂的研究

Research on New Core Binder YF

芯砂用新型YF粘结剂的研究

They will gather the weeds and bind them up in bundles and burn them.

他们会将稗子蓐出来，捆好后，用火烧了。

In order to readjust and optimize the service industry structure of Yanbian region, we shall set scientific development as guideline and bind up in building up modern service industry to gradually replace the conventional service.

因此，要以科学发展观为指导，围绕建设现代服务业发展的目标，使现代服务业逐步取代传统服务业的位置，从而调整和优化延边地区服务业的产业结构。