3-D Finite Element Simulation of Bolted Flange Joint Considering Gasket Nonlinearity

Advances of Research on Bolted Flange Joints at Elevated Temperature

高温螺栓法兰连接研究进展

Bolted flange sealing is widely used in process industry nowadays.

法兰密封在流程工业中应用广泛。

Leakage rate calculation of bolted flange connections

螺栓法兰连接系统泄漏率计算

All field splices were bolted using ASTM A325 hex head bolts.

所有现场拼接都用美国材料试验协会的A325六角形头螺栓

The bolt snapped into place.

门闩啪一声扣上了。

The bolt clicked into place.

门闩咔嗒一声插上了。

If someone invented a machine that would turn a bolt into two nuts or two nuts into a bolt, nothing important would change about the story.

假如有人发明了一种机器，能够把一颗螺帽变成两个螺旋，或者把两个螺旋变成一颗螺帽，整个故事也不会发生任何重大变化。

She shut the door and slid the bolt into place.

她关上门，插上了门栓。

A bolt is fastened through the bush to thereby fix the rocker shaft on a cylinder head.

螺栓穿过衬套被紧固，从而将摇臂轴固定在气缸盖上。

The metal clamp is fixed on the bus bar through a bolt B passing through the threaded hole.

金属夹通过穿过螺纹孔的螺栓B固定在母排上。

Checking the resisting overturn ability of bolt which boring through the mass wall;

对固定龙骨的穿墙螺栓进行抗倾覆验算；

Lorne wakes up with a start, when there bursts out a thrilling vociferation in the western city, followed by a blue bolt flash through the sky without a thunderclap.

罗恩惊醒过来，这时他听见城西传来人的大声喊叫，接着他看见那屋顶的半边夜空闪过一道蓝光，象是闪电，却没有雷声。

The hexagonal bolt goes through the anti-receding expansion pipe and is screwed in the expansion pipe.

一六角螺栓，可穿过防退膨胀管，拧入膨胀管；

This text sets up into a part storehouse through the part mask works of the bolt through the stereotyped model of parameter, establish with a series of other standard components models easily.

本文通过参数公式化造型，通过螺栓零件模版建立零件库，轻松创建同一系列的其他标准件模型。

This paper discussed the horizontal forging process of a high strength long bolt through computer simulation, including the forming technology and technology parameters.

本文通过计算机模拟分析了高强度长螺栓平锻过程的变形特点，对其成形工艺和成形特点进行了分析。

Research on transition structure of body bolster with corrugated floor

波纹地板与枕梁过渡结构研究

The comparative research of fatigue life for body bolster structure base on railway car

铁路货车枕梁结构疲劳寿命对比研究

An automatic inspection and grouping of the bolster spring is realized with PLC as the control unit and linear encoder and rotary encoder as the measuring units.

用PLC作为控制单元，光栅尺、编码器作为测量元件，实现枕簧的自动检测与分组。

Therefore, the quality and performance of bolster spring need to be safeguarded stringently, such as measuring and matching before being assembled.

因此，车枕弹簧的质量和性能需要有严格的保障，在使用前必须经过测量和选配后方能组装。

Life Analysis on Bolster Spring Fatigue Test of Z_ ( 8A) Bogie

转（8A）型枕簧疲劳试验寿命分析