Low alloy heat-resistant bolting steel is widely applied in large-capacity steam turbine and other generating machinery.

Bolted splices have been used and no cracking of these bolted splice details has been reported.

已使用螺栓拼接，且未曾报告这些螺栓拼接细部出现破裂。

In steel frame structure, high-strength bolted splice connections in beams and braces are often used when the lengths of members are limited by transportation or erection.

在钢框架结构中，由于构件运输或吊装能力的限制，以及节点设计的构造要求，高强螺栓拼接节点常用于梁的拼接和斜撑的拼接。

The bolted splice plates behave like a hinge, i.e., they do not take bending moments.

螺栓拼接板如铰链般发挥作用，亦即，它们不会出现弯矩。

Results showed that the ductility of bolted splice joint is much better than that of the welded one;

试验结果表明：螺栓拼接节点的延性远好于梁柱焊缝连接；

The top chords will be designed with a temporary bolted splice at mid-span.

设计顶部弦杆时，应在跨距中间有一临时螺栓铰接。

A Test Research on Fretting Damage of Bolted Joint and Its Coating Glue Protection

螺栓联接件的微动损伤及其涂胶防护试验研究

Strength studies on non-even distribution bolted joint in composite laminates

复合材料非均匀分布多钉连接强度研究

Nonlinear Model of Bolted Joint and Its Wave Energy Dissipation

螺栓接头非线性模型及其波能耗散

Fatigue Design of Bolted Joint in a Steel Structure

金属结构中螺栓联接的疲劳设计

A Study on the Tangential Dynamic Characteristic Parameters of Bolted Joint

螺栓结合部切向动态特性参数的实验研究

Study on Energy Dissipation of Axial Vibration in Bolted Joint

螺栓连接接口轴向振动能量耗散特性研究

Behaviour of Bolted Joint in Timber; Structure and Design Formulae

木结构螺栓连接的承载能力&对国际标准化协会木结构设计规范螺栓连接计算公式的建议

Trends of Bolted Flange and Gasket in European Standard

欧洲螺栓法兰设计和垫片标准的新动向

The Heat Transfer Model between Bolt and Bolt Hole of Bolted Flange Sealing

法兰密封中螺栓与螺栓孔的传热学模型建立

3-D Finite Element Simulation of Bolted Flange Joint Considering Gasket Nonlinearity

考虑垫片非线性时法兰接头性能的三维有限元模拟

Advances of Research on Bolted Flange Joints at Elevated Temperature

高温螺栓法兰连接研究进展

Bolted flange sealing is widely used in process industry nowadays.

法兰密封在流程工业中应用广泛。

Leakage rate calculation of bolted flange connections

螺栓法兰连接系统泄漏率计算

All field splices were bolted using ASTM A325 hex head bolts.

所有现场拼接都用美国材料试验协会的A325六角形头螺栓

The bolt snapped into place.

门闩啪一声扣上了。