Furnace Brazing Technique of Aluminium-alloy Case for Airborne Electronics in Nitrogen Atmosphere

Furnace Brazing Technique of 6063 Alloy and its Wave-guide Components

6063铝合金及其波导制件气保护钎焊工艺研究

Furnace brazing technique of wave-guide made from 6063 alloy is studied.

采用气保护炉钎焊方法对6063铝合金及其波导进行了钎焊工艺研究。

A novel technology of adaptive focusing that serves to the ultrasonic C scan imaging testing of electric contact brazing interface with arc surface by controlling the three dimensional precision working table, has been developed by presenting the algorithms of adaptive following the tracks of transducer focusing.

采用自适应跟踪探头聚焦轨迹算法研究了自适应聚焦技术，通过控制三维精密工作台实现了弧型电触头钎焊界面的C扫描超声检测。

Electric brazing machine and apparatus ( excl. furnaces, ovens and heating equipment) concentrating machinery or plant, fitted with thermal equipment, non-domestic

电硬焊机器和设备（熔炉，烘炉和加热设备除外）非家用选精机或装置，装有加热设备

Magnesium Alloy Melting Furnace Structure Design and Research Based on Flow Heat Transfer Analysis electric brazing machine and apparatus ( excl. furnaces, ovens and heating equipment)

基于流动传热分析的镁合金熔化炉结构设计与研究电硬焊机器和设备（熔炉，烘炉和加热设备除外）

Electric brazing machine and apparatus ( excl. furnaces, ovens and heating equipment)

平板式远红外线加热炉电硬焊机器和设备（熔炉，烘炉和加热设备除外）

A Study on Brazing of Graphite to Brass and Analyse of Interfacial Microstructure

石墨黄铜异质钎焊研究及界面结构分析

Improvement of High-frequency Induction Brazing Process for Brass and Stainless Steel Tube

黄铜与不锈钢管高频感应钎焊工艺的改进

A trundled multi-station torch brazing machine is researched and developed for applying to the brazing of hydraulic accumulator in compressor.

研究开发了转盘式多工位自动火焰钎焊机，适用于压缩机储液器的大批量钎焊生产。

Experimental Research on Torch Brazing Solder for Al-Cu Joint Welding

铝－铜火焰钎焊材料研究

Study of the Action Mechanism of cobalt in Copper-based High Temperature Brazing Alloy

铜基高温钎料中钴作用机制的研究

R& D of Low Temperature Ceramic/ Metal Brazing Alloy

环保型陶瓷/金属低温钎料的研究与开发

This paper studies the material components of Polycrystalline Diamond Compact ( PDC) blank, bit matrix and brazing alloy, and discusses some drilling technical parameters relating to the above problems.

本文分析研究了PDC托的材料成分、钻头胎体的材料成分和钎焊合金的材料成分，并讨论了与之相关的一些钻井工艺参数问题。

QJ301 is a copper-based brazing welding used solvent, the solvent particles uniformly fine at a temperature of850-1150 ℃, copper and brass brazing alloys gas welding or brazing flux when used.

QJ301是一种基于铜焊接用的铜焊溶剂，本溶剂颗粒均匀细微，在温度为850-1150℃，钎焊紫铜及黄铜合金气焊或钎焊时作助熔剂用。

Argon gas atmosphere furnace brazing of SiC_p/ 101Al composites

SiC p/101Al复合材料的氩气保护炉中钎焊

High-frequency induction brazing technology and interface microstructure of Al/ 45 steel

Al/45钢高频感应钎焊工艺及界面组织结构

A new resonance frequency auto tracing technology for IGBT induction brazing power source

一种新型逆变式感应钎焊电源频率自动跟踪技术

Application of High Frequency Induction Brazing of Conduits in Aircraft Manufacture

导管高频感应钎焊在飞机制造中的应用

Study of Heat Treatment Technics on Carbide Joint by High Frequency Induction Brazing

高频感应钎焊硬质合金接头热处理工艺研究

Optimization selection of power source frequency in high frequency induction brazing

高频感应钎焊中电源频率的优化选择