As the brazing temperature increased, shear strength of the joints increased and then decreased.

When the brazing temperature exceeded 650 ℃, the tensile strength decreased.

温度高于650℃，抗拉强度降低；

Study on effect of brazing temperature on wear properties of brazed WC coatings

钎焊温度对WC金属布钎焊耐磨层性能研究

However, the brazing temperature had little influence on the liquefying time.

而钎焊温度对中间层的液化时间没有明显的影响。

The influence of brazing temperature and time on the wettability is significant.

钎焊温度和时间对润湿性有重要影响。

Electron beam brazing temperature field PID control system

电子束钎焊温度场PID控制系统

Research on Furnace Brazing of Diamond Grinding Wheel with Ni-Cr Alloy under Argon Atmosphere

Ni-Cr合金Ar气保护炉中钎焊金刚石砂轮的研究

Adaptability of brazing filling metal used for monolayer diamond tools with vacuum furnace brazing

金刚石工具真空钎焊钎料的适应性

Furnace Brazing Technique of Aluminium-alloy Case for Airborne Electronics in Nitrogen Atmosphere

机载电子设备铝合金箱体氮气保护钎焊工艺

Furnace Brazing Technique of 6063 Alloy and its Wave-guide Components

6063铝合金及其波导制件气保护钎焊工艺研究

Furnace brazing technique of wave-guide made from 6063 alloy is studied.

采用气保护炉钎焊方法对6063铝合金及其波导进行了钎焊工艺研究。

A novel technology of adaptive focusing that serves to the ultrasonic C scan imaging testing of electric contact brazing interface with arc surface by controlling the three dimensional precision working table, has been developed by presenting the algorithms of adaptive following the tracks of transducer focusing.

采用自适应跟踪探头聚焦轨迹算法研究了自适应聚焦技术，通过控制三维精密工作台实现了弧型电触头钎焊界面的C扫描超声检测。

Electric brazing machine and apparatus ( excl. furnaces, ovens and heating equipment) concentrating machinery or plant, fitted with thermal equipment, non-domestic

电硬焊机器和设备（熔炉，烘炉和加热设备除外）非家用选精机或装置，装有加热设备

Magnesium Alloy Melting Furnace Structure Design and Research Based on Flow Heat Transfer Analysis electric brazing machine and apparatus ( excl. furnaces, ovens and heating equipment)

基于流动传热分析的镁合金熔化炉结构设计与研究电硬焊机器和设备（熔炉，烘炉和加热设备除外）

Electric brazing machine and apparatus ( excl. furnaces, ovens and heating equipment)

平板式远红外线加热炉电硬焊机器和设备（熔炉，烘炉和加热设备除外）

A Study on Brazing of Graphite to Brass and Analyse of Interfacial Microstructure

石墨黄铜异质钎焊研究及界面结构分析

Improvement of High-frequency Induction Brazing Process for Brass and Stainless Steel Tube

黄铜与不锈钢管高频感应钎焊工艺的改进

A trundled multi-station torch brazing machine is researched and developed for applying to the brazing of hydraulic accumulator in compressor.

研究开发了转盘式多工位自动火焰钎焊机，适用于压缩机储液器的大批量钎焊生产。

Experimental Research on Torch Brazing Solder for Al-Cu Joint Welding

铝－铜火焰钎焊材料研究

Study of the Action Mechanism of cobalt in Copper-based High Temperature Brazing Alloy

铜基高温钎料中钴作用机制的研究

R& D of Low Temperature Ceramic/ Metal Brazing Alloy

环保型陶瓷/金属低温钎料的研究与开发