alloy的例句大全

Furnace brazing technique of wave-guide made from 6063 alloy is studied.

采用气保护炉钎焊方法对6063铝合金及其波导进行了钎焊工艺研究。

Furnace Brazing Technique of 6063 Alloy and its Wave-guide Components

6063铝合金及其波导制件气保护钎焊工艺研究

Furnace Brazing Technique of Aluminium-alloy Case for Airborne Electronics in Nitrogen Atmosphere

机载电子设备铝合金箱体氮气保护钎焊工艺

Research on Furnace Brazing of Diamond Grinding Wheel with Ni-Cr Alloy under Argon Atmosphere

Ni-Cr合金Ar气保护炉中钎焊金刚石砂轮的研究

Interface Behavior and Joint Strength by TIG Arc Brazing for Titanium and Titanium Alloy

钛及钛合金电弧钎焊及接头强度

Effect of alloy powder on Microstructure of brazing seam

钎缝中合金粉对组织的影响

The cupping value of lubricated aluminum alloy sheet is studied by BCS-30D general sheet metal test machine.

在BCS-30D通用板材成形性试验机上，对铝合金薄板的杯突值进行了不同润滑条件的试验研究。

Development of Isothermal Holding Furnace for High Quality Aluminum Alloy Melt

高品质铝合金液保温炉的研制

Twin piston alloy callipers at the front and single piston callipers at the rear bring the large-diameter wheels to rest.

前轮是双活塞合金制动钳，而后轮是单活塞制动钳，可对大尺寸车轮进行制动。

Effect of Lanthanum on Hot Brittleness of the Al& 4% Cu Alloy

稀土La对Al-4%Cu合金热脆性的影响

Surface Oxidation and Hot Brittleness of Cu-Containing Low-alloy Steels

含Cu低合金钢表面氧化及热脆

The hot brittleness mechanism and structure of surface oxide coating of low-alloy steels containing 0. 3%-0. 7% of copper have been investigated by means of hot/ cold bending tests, optical microscopy, SEM and EPMA.

用冷、热弯试验及光学显微镜、扫描电子显微镜和X射线微区分析仪分析研究了含0.3%～0.7%Cu的低合金钢表面氧化层结构及热脆机理。

Nanostructured bulk of W-Cu alloy was prepared by mechanical alloying and hot pressed sintering.

在真空电炉中利用机械合金化和热压烧结法制备出纳米晶块体钨铜合金.

High-strength zinc alloy die casting material for beautiful and elegant lock and high security performance.

材质使用高强度锌合金压铸而成,结构美观大方,防盗性强.

PC + polyester alloy, unreinforced, General purpose, UV-Stabilized.

PC(聚碳酸酯)+聚酯非增强型混合物, 通用, 紫外线稳定.

We now offer single-mode and multimode mode fibers with high temperature aluminum or copper alloy coatings.

我们现在提供单模和多模光纤高温铝或铜合金涂层.

Magnesium alloy with lower density, lower viscosity and excellent liquidity is suitable for anti-gravity casting.

镁合金密度小 、 粘度低、流动性好,很适合于 反 重力铸造.

The forming mechanism of semi-solid material of AZ 91 D magnesium alloy was analyzed.

分析讨论了AZ91D镁合金半固态组织的形成机理.

The thixoforming force of semi solid A 356 alloy were calculated using upper bound theoretical method.

本文采用上界理论解法,求解半固态A356铝合金触变成形力.

Nanostructured M 50 steel is a new type of iron-based alloy material with prospect for commercialization.

纳米M50钢是一种具有产业化前景的铁基合金新型材料.