alloy的例句大全

Low alloy heat-resistant bolting steel is widely applied in large-capacity steam turbine and other generating machinery.

低合金耐热螺栓钢广泛应用于大功率汽轮机等发电设备中。

This paper attempts to design bogie frame which uses the aluminum alloy.

本文尝试采用铝合金材料来设计转向架构架。

The effect of alloy composition and original gas content on secondary blowhole is also studied. The Blowhole and Quality of Castings

研究合金成份和原始含气量对生成二次气孔的影响。铸件型腔气体和铸件品质

Main Elements of Secondary Blowhole in Silicon and Aluminum Alloy

影响铝硅合金中二次气孔的主要因素

Casting Technique of the Aluminum Alloy Right Box and Prevention of Slag Blowhole Defects

铝合金右箱体铸造工艺及渣气孔缺陷防止

Convergent beam electron diffraction study of C14 type Laves phase in GH 302 alloy

GH302合金中C14型Laves相的会聚束电子衍射研究

Exploration for Contact corrosion of Ti and Ti-Alloy and Protective Test

钛及钛合金接触腐蚀与防护试验探讨

The structure of the rust layer formed in marine corrosion of low alloy steel

低合金钢在海水中局部腐蚀锈层结构的研究

Study of Marine Corrosion of Low Alloy Steel with Electrochemical Impedance Spectroscopy

低合金钢实海腐蚀电化学阻抗谱研究阻抗传感器，阻抗换能器

The model of the aluminum alloy wheel classified as 16 x 6.57 is built. Static stress analysis is carried out to study the influence of bolt pre-tension, centrifugal force and the cornering force to the structural as well as the distributing rule of stress and strain.

首先根据试验工况建立起16×6.5J车轮的有限元模型，通过静力分析研究螺栓预紧力、旋转离心力和试验弯矩对车轮结构强度的影响以及车轮结构的应力应变分布规律。

The leading and trailing inserted tube for air coolant on an aeroengine is a thin wall component, it is made of Inconel 625 alloy sheet ( thickness 02mm).

航空燃气涡轮发动机前后冷气导管是一薄壁（δ＝0.2mm）零件，材质为Inconel625高温合金。

The Cu-Ni alloy with a certain content of sulphur is obtained from the high-matte nickel by angular-blow rotary converter with pure oxygen.

高冰镍经氧气斜吹转炉吹炼成合一定硫的Cu-Ni合金，再经水雾化后成为高活性羰基化原料。

Analysis and Control of Defects in Quality Carbon Steel and Alloy Structural Steel Produced with Converter Process

转炉优质碳素钢和合金结构钢质量缺陷表现形式分析与控制

Research on the Ausforging of Constructional Alloy Steel

合金结构钢锻后淬火工艺的研究

The Application of Eddy Current Electrical Conductivity Testing in the Quality Control of Aluminium Alloy

电导探示器（料位检测用）电导率涡流检测技术在铝合金质量控制中的应用

Simulation of Connecting Tube's Roller Inner Swaging For Titanium Alloy

钛合金连接管件内径滚压成形的数值模拟

New constantan resistance alloy

GB/T6149-1985新康铜电阻合金

This paper mainly presents that constructional mid-carbon alloy steel, after bulk moulding deformation, heat treatment and cold surface deformation can raise fatigue strength of materials effectively.

本文主要介绍中碳合金结构钢经整体塑性变形、热处理后再进行表面冷变形工艺是提高材料疲劳强度的有效途径。

As the lightest constructional material, magnesium alloy has high specific strength, high specific stiffness, good magnetic-shielding ability, good damping ability, and good machinability.

镁合金是目前比重最轻的结构材料，具有高的比强度、比刚度和良好的磁屏蔽性、阻尼性、切削加工性等优点。

The contact corrosion occurred between Ti or Ti-Alloy Parts and other metals in the aircraft structures is described in this paper.

本文叙述了飞机结构中钛及钛合金件与其它金属件之间所发生的接触腐蚀。