alloys的例句大全

The brightener corporate action model affords theory guidance on choosing brighteners used in bath for tin-based deposits, and the mechanism of competed discharge of complexing ions enriches theory of co-deposition of alloys.

建立的光亮剂协同作用模型可为锡基合金镀液中光亮剂的选择提供理论指导，提出的配合离子竞争放电机制，丰富了合金共沉积理论。

Study of marine corrosion and antifouling behavior of copper alloys

铜合金实海暴露腐蚀与抗污行为的研究

High Temperature Elastic Properties of Light Metal-Alloys

轻金属合金高温弹性的研究

Thus the AHS alloys with proper addition of Sb have the best microstructure and properties.

且在相同条件下,用Sb变质的AHS合金具有最佳的力学性能.

Determination of thorium dioxide in thorium-tungsten alloys& Weight method

GB/T3312-1982钨钍合金中二氧化钍的测定重量法

Effect of Cyclic Treatment on Dimensional Stabilization of Al Alloys

循环处理对铝合金尺寸稳定性的影响

Manufacturing: industrial silicon, metal magnesium, calcium carbide , high-carbon ferrochrome, silicon chromium alloys, low carbon ferrochrome China.

制造: 工业硅 、 金属镁 、 电石 、 高碳铬铁 、 硅铬合金 、 中低微碳铬铁.

This paper presents a new type of Fe-base wear-resistant materials-FCB alloys.

介绍了以高硬度的M2B硼化物为耐磨骨架的新型铁基 耐磨 材料FCB合金.

Keyless entry, privacy glass, and 16-inch alloys are among the standard upgrades over the base Soul.

无钥匙进入, 隐私玻璃, 16英寸合金属于标准升级的基础灵魂.

The body-centred cubic crystalline phase of iron-based alloys.

铁基合金的以主体为中心的立体晶体相位.

New Type Melting and Holding Furnace of Aluminum-alloys

新型铝合金熔化保温炉

QJ301 is a copper-based brazing welding used solvent, the solvent particles uniformly fine at a temperature of850-1150 ℃, copper and brass brazing alloys gas welding or brazing flux when used.

QJ301是一种基于铜焊接用的铜焊溶剂，本溶剂颗粒均匀细微，在温度为850-1150℃，钎焊紫铜及黄铜合金气焊或钎焊时作助熔剂用。

Crumble to [ into] dust dispersion strengthened alloys made by powder metallurgy

碎成粉末，化为尘土粉末冶金弥散强化合金

Common materials for the MTJ include chromium dioxide and iron-cobalt alloys.

制作磁隧道结的通用材料有二氧化铬和铁钴合金。

Improvement and optimization of titanium alloys countersink drill

钛合金锪钻改进与优化设计

Through comparing the valence electron structure in austenitic crystal cell among all kinds of alloys, the strong covalent bond of austenitic crystal cell valence electron structure is thought as a main factor to influence the stability of austenite.

对各种合金奥氏体晶胞价电子结构进行比较后，认为影响合金奥氏体稳定性的主要因素是奥氏体晶胞价电子结构的强共价键。

The stainless steels and high nickel corrosion resistant alloys are critical engineering materials.

不锈钢和高镍耐蚀合金是重要的耐蚀材料。

Temperature field thermography on friction facing of certain wear-resistant alloys

几种耐磨合金磨损温度场的热图

Present study shows that addition a small amount of A1, Ni, etc, to the Cu-Zn alloy for condenser tules enhances the combined corrosion resistance markedly, These new alloys can be used in maritime power-station or for cooling water of unfavorable quality.

结果表明，在铜锌合金中，加入少量的铝和镍，可较明显地提高原合金的综合耐腐蚀性能，能在沿海电站、或不良的淡水水质条件下使用。

The contact corrosion of anodized titanium alloys

阳极化钛合金的接触腐蚀