angle的例句大全

The paper set up mechanics model of roll cylinder mill, inquired into crushing stress of materials by mill and materials clamp angle and energy requirement problems.

本文建立了辊筒磨的力学模型，探讨了辊筒磨对物料的粉碎力、以及物料钳角、单位质量能耗等问题，并通过实验进行了验。

Crystalline behavior of segmented polyester polyurethaneurea ( PUU) elastomers at different annealing conditions was studied by wide-angle X-ray diffraction ( WAXD), and crystalline morphologies of the fracture surface of these materials were investigated by scanning electron microscopy ( SEM).

用宽角X-ray衍射（WAXD）研究了嵌段聚酯脲氨酯（PUU）弹性体在不同退火条件下的结晶行为，用扫描电子显微镜（SEM）研究了这些材料断面上的结晶形态。

Theoretical calculation shows that the sun phase angle, observation distance and the brightness magnitude of the targeted satellite change significantly because of no earth curvature effect and large separation distance in position.

仿真计算表明，天基观测由于不受地球曲率影响，且观测几何拉开，太阳相位角、观测距离变化范围较大，因此目标卫星视星等变化范围较大。

The paper describes a high resolution, high accuracy and simple method of measuring dymamic angle by means of optical self-collimating of concave mirror curvature center.

用四球面反射镜曲率中心光学自准方法，通过测量自准像位移来计算弯沉角，是一种高分辨率、准确、简单地测量方法。

The principle and algorithms of generating curve using cut angle method

割角法画曲线的原理及其算法

Study on tube settler of square cross section with cut angle

关于缺角正方形斜管的研究

Study on Optimal Cut Angle in 1D and 2D Passive Sensor Triangulation with Different Measure Errors

不同量测误差情况下1D和2D被动传感器交叉定位系统最优交会角研究

Results: The foreward micromotion of the standard polyethylene component increased significantly with the increases of posterior slope cut angle.

结果：每增加关节面后倾切除角度，标准聚乙烯假体的向前移动随之显著增加。

The author analyzed the relationship of cut angle, cut depth and teeth contact force. The conclusion of analysis soft is similar to the results of experiment.

分析了斗齿切入角度、切入深度与斗齿接触力的关系，所得到的结论与利用静力触探仪试验的分析结果相似。

The increase of posterior slope cut angle significantly decreased the tibial anterior compressive strains, and significantly increased the tibial posterior compressive strains.

在胫骨载荷方面，增加关节面后倾切除角度显著减少胫骨前面的压应力，而胫骨后面的压应力则显著增加。

Through lowering the air inlet total pressure, reducing the compression angle of air, increasing the nozzle length, cutting down the nozzle radius and the axial gap of electrode, the arc ignition energy can be improved.

通过减小流动压差、缩小空气压缩角、增加喷孔长度、减小喷孔半径以及减小轴向间隙等可以有效提高电弧的点火能量。

Determination of the Cutting Angle of Cone Spline

圆锥花键切削角的设计

Recommended for heavy duty machining of soft aluminium and ferrous materials, such as tapping, ream and sawing. top plate cutting angle

推荐使用于软铝、黑色金属的重负荷加工，如，切螺纹、铰孔和锯削等。顶片切削角-锯链

Technology Control of Cutting Angle Process of Sheet Glass

薄板玻璃切角工艺控制

Study of Constant Cutting Angle and Speed in Cam Turning

凸轮车削恒切削角、恒切削速度研究

Study on Deformation of Oblique Cutting with Large Cutting Edge Inclination Angle

大刃倾角切削的变形研究

It is found that un-breaking field will be enlarged with the decrease of the tool cutting edge angle because of the lessening of the diameter of the cutting angles.

指出随主偏角的减小，其非折断区域将进一步扩大，切屑外径的减小是其不折断的主要原因。

And the main factors which influence critical tool cutting edge angle are studied, and related theory analysis are made. Furthermore, some new controlling methods and technologys to restrain or decrease the feed direction burrs in machining Processes are developed.

讨论了有关主要因素对临界主偏角的影响，进而开发出了几种抑制或减小进给方向毛刺的新工艺和新方法。

Calculation of Side Cutting Edge Angle of Gear Shaping Cutter

插齿刀侧刃切削角度的计算

This paper introduced the machining properties of PCD tool in cutting out Al2O3 laminated flooring, and made a study on the configuration of tools, the material 0f cutting edge, the engagement angle of the tools and the machining parameters.

本文介绍了切削Al2O3强化木地极的加工特点，研究了金刚石刀具的结构、切削刃材料、几何角度及切削参数等。