annealing的例句大全

Hard elastic polypropylene is formed by crystallized under strain and annealing.

硬弹性聚丙烯是在应变结晶和热结晶两个复合过程中形成的.

The suitable recovery strain annealing temperature was 500 ℃.

适宜的回复应变退火温度为500℃.

To optimize sub-job assignments, two simplified algorithms of simulated annealing are proposed.

为优化子作业指派, 提出了两个简化的仿真退火算法.

Annealing: Heating to 780 ~820 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至780～820℃,在此温度停留1～3小时, 在炉中冷却.

Braising , boiling, annealing, setbacks and struggling all necessary processes of shaping.

炖 、 熬 、 磨练 、 挫折、挣扎,这些都是成长必经的过程.

Annealing: Heating to 820 ~870 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至820～870℃,在此温度停留1～3小时, 在炉中冷却.

Annealing: Heating to 710 ~740 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至710～740℃,在此温度停留1～3小时, 在炉中冷却.

The microstructures of Cu-Zn powder under different annealing conditions were studied.

研究了铜锌粉末在不同退火工艺下的显微组织变化.

Annealing: Heating to 800 ~880 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至800～880℃,在此温度停留1～3小时, 在炉中冷却.

Annealing: Heating to 740 ~770 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至740～770℃,在此温度停留1～3小时, 在炉中冷却.

In the paper, the structure of morden continuous annealing furnace was introduced.

文章介绍了现代用于冷轧不锈带钢生产的连续退火炉的组成及结构.

The purpose of annealing the metal is to relieve the stress.

给金属退火是为了减少一些应力.

In addition, this kind of material could be machined after annealing treatment.

且该材质具有退火后可切削加工的性能.

Annealing: Heating to 400 ~650 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至400～650℃,在此温度停留1～3小时, 在炉中冷却.

One two-speed annealing furnace Glassware, Kao Hua furnace, favored by the industry.

其中双速玻璃制品退火炉 、 烤花炉, 深受同行业青睐.

Strip breakage happened very often in the annealing assembly line at the silicon steel workshop of Wuhan Iron& Steel Corp.

武钢硅钢厂退火生产线经常发生因带钢跑偏造成断带事故。

The volume fraction, Si content and the size of the DO_3 ordered region of α-Fe ( Si) phase increase as the annealing time increases.

随退火时间的延长，α－Fe（Si）的体积分数，Si含量及DO3有序区尺寸增加。

Study on Strip Breakage Inside Furnace of Continuous Annealing Line of Cold Rolled Sheet

冷轧薄板连续退火线炉内断带原因分析

Singly heat-providing technological transformation of dry oven and annealing furnace for steel casing

铸钢烘干炉和退火炉单一供热的技术改造

Ion implantation technique for the fabrication of very high-speed bipolar circuits is discussed in the paper, with emphasis on the ion implantation doping and shallow junction formation and the annealing of the implanted layer in bipolar device process.

本文讨论了高速双极器件制造中的离子注入技术。重点讨论在双极器件制造工艺中的离子注入掺杂技术，离子注入形成浅结技术，以及离子注入层的退火技术。