annealing的例句大全

Ion implantation technique for the fabrication of very high-speed bipolar circuits is discussed in the paper, with emphasis on the ion implantation doping and shallow junction formation and the annealing of the implanted layer in bipolar device process.

本文讨论了高速双极器件制造中的离子注入技术。重点讨论在双极器件制造工艺中的离子注入掺杂技术，离子注入形成浅结技术，以及离子注入层的退火技术。

Singly heat-providing technological transformation of dry oven and annealing furnace for steel casing

铸钢烘干炉和退火炉单一供热的技术改造

Study on Strip Breakage Inside Furnace of Continuous Annealing Line of Cold Rolled Sheet

冷轧薄板连续退火线炉内断带原因分析

Strip breakage happened very often in the annealing assembly line at the silicon steel workshop of Wuhan Iron& Steel Corp.

武钢硅钢厂退火生产线经常发生因带钢跑偏造成断带事故。

To introduce the application of intelligent control in temperature control process of oil-burning annealing furnace.

简要介绍智能控制在燃油退火炉温度控制过程中的应用.

The Annealing Furnace is a key Equipment for any Hot Dip Galvanizing Line.

对于任何连续热镀锌线退火炉都是关键设备.

Chromium doped titanium dioxide Cr-TiO2 was prepared by the sol-gel method. The effects of annealing temperature on the crystal structure, oxidation states of chromium, and UV-vis absorption proper-ties of Cr-TiO2 were investigated in details.

采用溶胶-凝胶法制备了铬掺杂二氧化钛（Cr-TiO2），并对经过不同温度烧结的Cr-TiO2的结构、吸收光谱及样品中铬的氧化态等进行了表征。

Exact 2-D Analytical Model of Ion Implanted Dopant Redistribution During Annealing

在退火过程中离子注入杂质再分布的二维精确解析模型

The line is composed of hot gas generator , melting furnace and annealing furnace in series.

研制成功一种新型烧煤的炉组,由热煤气炉 、 熔化炉和退火炉串联组成.

Simulated annealing algorithm ( SAA) is briefly introduced. Three important reference functions including porosity, two-point probability function and linear path function for constructing digital core are listed.

简要介绍了模拟退火算法，给出了用于建立数字岩心的三个重要参考函数：孔隙度、两点概率函数和线性路径函数。

In this paper, the forming shaping and effecting elements of free cementite in the lowcarbon annealing steel are studied.

本文对低碳退火钢中的游离渗碳体的形成、形态及影响因素进了工艺试验和分析。

Design of a Wire Belt Glassware Annealing Lehr

玻璃制品网带退火炉的设计

Test plus Application of Hi-frequency Annealing Process for Card Wire

针布齿条高频退火工艺的试验和应用

There are a lot of adsorbed oxygen on the surface of unannealed Fe2O3/ SnO2 bilayer and a few adsorbed oxygen left on the surface after annealing.

结果表明：Fe2O3/SnO2膜表面，晶格氧的结合能为529.85eV，热处理前有大量吸附氧存在，在600℃退火后，大部分羟基、羰基形态的吸附氧解吸；

The maximum GMI ratio of33% of these sample was observed by annealing at200 ℃.

观察到200℃退火后样品最大巨磁阻抗效应为33%。

The optimized annealing temperature was 61 ℃ for primer ( GTG)-6.

引物（GTG）6的最适退火温度为61℃。

Investigation on Annealing Thermal Process of HPH Furnace ( I): Mathematical Model

全氢罩式退火炉退火热过程的研究（Ⅰ）&数学模型及其实测验证

Application of PLC in HPH Batch Annealing Control System

PLC在HPH罩式退火炉控制系统中的应用

The life of the sheep shearing machine cutter after quenching is improved largely by using the new process instead of traditional spheroidizing annealing.

用于剪毛机刀片代替球化退火作毛坯预处理，淬火后刀片寿命大幅度提高。

During the intermediate annealing, foil material rolling, the effective action has been taken to guarantee the size tolerance;

在中间热处理、箔材轧制等环节采取有效措施保证了尺寸公差；