annealing的例句大全

Annealing: Heating to 830 ~880 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至830～880℃,在此温度停留1～3小时, 在炉中冷却.

Annealing: Heating to 800 ~850 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至800～850℃,在此温度停留1～3小时, 在炉中冷却.

Annealing: Heating to 750～780℃ , Holding time 1～3 h, Colding in furnace.

退火: 加热至750～850℃, 在此温度停留1～3小时,在炉中冷却.

Research on the Optimal Attribute Set of Decision Tables Based on the Simulated Annealing Algorithm

基于模拟退火算法的决策表最优属性选择

Adhibit efficiency function, The genetic annealing evolutionary algorithms are applied to realize the optimization of scheduling decisions.

引入效率函数，运用遗传退火进化算法实现了调度决策的优化；

Solved the Least Absolute Deviation based on Genetic Simulated Annealing Algorithm.

应用遗传模拟退火算法解决最小一乘模型参数估计问题。

As the annealing temperature risen, the transmittance enhanced, but the resistively increases rapidly.

但是随着退火温度的升高，可见光透过率变大，但是电阻率急剧增加。

The strong convection bell-type annealing furnace with complete hydrogen

强对流全氢罩式退火炉

Heating Balance Calculation of Strong Convection Gas Shield Annealing Furnace

强对流气体保护退火炉热平衡计算

Lastly, effects of annealing under high magnetic field on the structure of spheroidal graphite cast iron, gray cast iron and 45# steel were investigated. The solidification of Al-12% Si under high magnetic field was also carried out.

最后本文还分别进行了灰铁、球铁、45钢强磁场下退火处理，以及Al&12%Si合金强磁场下凝固实验，并对实验结果进行了分析。

Crystalline behavior of segmented polyester polyurethaneurea ( PUU) elastomers at different annealing conditions was studied by wide-angle X-ray diffraction ( WAXD), and crystalline morphologies of the fracture surface of these materials were investigated by scanning electron microscopy ( SEM).

用宽角X-ray衍射（WAXD）研究了嵌段聚酯脲氨酯（PUU）弹性体在不同退火条件下的结晶行为，用扫描电子显微镜（SEM）研究了这些材料断面上的结晶形态。

The volume fraction, Si content and the size of the DO_3 ordered region of α-Fe ( Si) phase increase as the annealing time increases.

随退火时间的延长，α－Fe（Si）的体积分数，Si含量及DO3有序区尺寸增加。

The microhardness and wearing resistance is increased with increasing annealing temperature.

随着退火温度的升高，耐磨性和显微硬度都有所提高。

Prolonging the holding time of the electric pulse annealing, the full wave at half maximum ( FWHM) of the halo peak for amorphous phase became narrow, indicating an enhanced short range order.

电脉冲后等温晶化过程中，延长等温时间，非晶馒头峰的半高宽（FWHM）变窄，表明BMG内短程有序程度增加。

Testing method for annealing point and strain point of glass by beam bending

玻璃退火点和软化点测定方法-压梁法

By controlling the cooling speed of pierced billet after hot piercing, the DP-structure F+ B could be obtained. The times of annealing the process of cold, drawing could be decreased by 50%.

控制热穿孔后荒管的冷却速度可获得F＋B的双相组织，并减少冷拔过程中50%的退火次数。

Ion implantation technique for the fabrication of very high-speed bipolar circuits is discussed in the paper, with emphasis on the ion implantation doping and shallow junction formation and the annealing of the implanted layer in bipolar device process.

本文讨论了高速双极器件制造中的离子注入技术。重点讨论在双极器件制造工艺中的离子注入掺杂技术，离子注入形成浅结技术，以及离子注入层的退火技术。

Singly heat-providing technological transformation of dry oven and annealing furnace for steel casing

铸钢烘干炉和退火炉单一供热的技术改造

Study on Strip Breakage Inside Furnace of Continuous Annealing Line of Cold Rolled Sheet

冷轧薄板连续退火线炉内断带原因分析

Strip breakage happened very often in the annealing assembly line at the silicon steel workshop of Wuhan Iron& Steel Corp.

武钢硅钢厂退火生产线经常发生因带钢跑偏造成断带事故。