brittleness的例句大全

The brittleness of brazed seam for nickel-base brazing filler metals is always paid close attention.

镍基 钎料的钎缝脆性问题,一直是人们关注的研究课题.

The reason of fracture is hydrogen brittleness.

其断裂机理为氢致开裂.

High resiliency, easy to pucker and non-brittleness.

富有弹性, 易于折叠, 非 脆性.

Does blood capillary brittleness slant what to drug treatment should use greatly?

毛细血管脆性偏大该用什么药治疗?

Much of the problem with binary serialization is its brittleness.

XML一般也比较强壮,因为你可以对你所不了解的数据视而不见.

However, there are not consistent brittleness indexes by now.

然而, 迄今为止,脆性指标并不一致.

Meanwhile, inherent brittleness of urushiol has limited its development and application.

同时, 漆酚清漆固有的脆性等也限制了其发展和应用.

Brittleness is often a result of alloying.

脆性往往是合金化的一种结果.

Anneal means making harden steel soft and removing brittleness.

退火就是使淬火钢变软并消除其脆性.

However, the intrinsic brittleness of ceramics has limited their use in critical load bearing structural components.

然而, 陶瓷固有的脆性限制了其作为高载荷部件方面的应用.

Ring hammer hammer ( heavy hammer breaking machine ) suitable hardness and brittleness's category below the broken material.

环锤式碎石机 ( 重型锤破机 ) 适用于莫氏硬度五级以下的脆性物料的破碎.

In still higher concentrations it crystallizes and adds brittleness as in hard candies.

在浓度更高时可产生结晶,增加体系脆性,比如硬糖.

The key of analysis of the brittleness of system is to build the brittle model.

系统的脆性分析的关键是要建立脆性模型.

The reason of temper brittleness belong with bainite ferrite and retain austenite decompose carbide.

500℃回火出现回火脆性,其原因与组织中的贝氏体、铁素体及残余奥氏体分解形成碳化物有关.

Under normal temperature , MoSi, element is very brittleness, while under high temperature it is plasticity.

二硅化钼电热元件常温卜脆性很大, 高温时又有可塑性.

In this paper, blind welding, cold shortness and hydrogen brittleness are mainly discussed as the major problems arising in underwater wet welding.

湿法焊接的主要问题是“盲焊”、“冷脆”和“氢裂”，本文介绍了克服这些弊端的工艺和方法；

The increase of phosphorous content will decrease the ductility and toughness of the steel, especially with the increase of carbon content in steel, this phenomenon is usually called "cold brittleness".

磷对绝大多数钢种来说是有害元素，磷含量的增加会使钢的塑性和韧性降低，通常称为冷脆性。随着钢中碳含量的增加，这种现象更为严重。

Surface Oxidation and Hot Brittleness of Cu-Containing Low-alloy Steels

含Cu低合金钢表面氧化及热脆

Phase Chart Analysis of "Red Brittleness" Phenomenon in the Industrial Pure Iron Forging Because of over-heated, hardness of part blade on the cutter is inadequate.

工业纯铁锻造过程中红脆现象的相图分析原有刀片刃口局部材料的硬度不够，材质脆性过大，有过热现象。

Effect of Lanthanum on Hot Brittleness of the Al& 4% Cu Alloy

稀土La对Al-4%Cu合金热脆性的影响