brittleness的例句大全

However, a temper brittleness has appeared after high temper.

空冷后高温回火产生回火脆性。

A study on high temperature temper brittleness by internal friction measurements

结构钢高温回火脆的内耗法研究

Analysis of Weld Property and Temper Brittleness for Cr-Mo Steel

Cr-Mo钢的焊接性和回火脆性分析

Plotting the curve of temper brittleness transition temperature by computer

用计算机绘制回火脆性转变温度曲线

In this paper, blind welding, cold shortness and hydrogen brittleness are mainly discussed as the major problems arising in underwater wet welding.

湿法焊接的主要问题是“盲焊”、“冷脆”和“氢裂”，本文介绍了克服这些弊端的工艺和方法；

A brief summary of segregation. especially nonequilibrium of interface& grain boundary, is presented in this paper, and the relationship between segregation of intergranular boundary and the cold brittleness is also introduced.

简要介绍了偏聚特别是晶界非平衡偏聚研究的历史和现状.并扼要介绍了品界非平衡偏聚与材料冷脆之间的关系。

The increase of phosphorous content will decrease the ductility and toughness of the steel, especially with the increase of carbon content in steel, this phenomenon is usually called "cold brittleness".

磷对绝大多数钢种来说是有害元素，磷含量的增加会使钢的塑性和韧性降低，通常称为冷脆性。随着钢中碳含量的增加，这种现象更为严重。

Large quantity of rejected products involving edge crack and strip breakage are prone to occur in hot and cold rolling of the oriented silicon steel sheets due to high brittleness of the steel caused by its high silicon content.

取向硅钢含硅量高，钢质脆性大，在热轧和冷轧过程中容易产生大量边裂及断带轧废。

Not only it generate hot brittleness, also it can cause much negative impact on hot-working character, mechanical property, welding performance, resistant character, processability and cold-heading.

硫不仅能引起钢的热脆，而且对钢的热加工性能、力学性能、焊接性能、耐腐蚀性能、成型性以及冷镦性能都有很大的负面作用，所以脱硫一直是冶金工作者研究的重点之一。

The hot brittleness mechanism and structure of surface oxide coating of low-alloy steels containing 0. 3%-0. 7% of copper have been investigated by means of hot/ cold bending tests, optical microscopy, SEM and EPMA.

用冷、热弯试验及光学显微镜、扫描电子显微镜和X射线微区分析仪分析研究了含0.3%～0.7%Cu的低合金钢表面氧化层结构及热脆机理。

A chromosome brittleness test was also carried out on 6 exfoliative patients.

对6例剥脱性皮炎进行染色体脆性分析。

A series of analysis were made on the cracked area, including macro-and micro-analysis, chemical, hardness, microstructure test and hydrogen brittleness removing test.

对该失效件进行了断口宏观分析以及扫描电镜微观分析、化学成分分析、硬度检测、金相组织观察、并进行了氢脆试验验证。

" Rubber, vulcanized& Determination of low-temperature brittleness ( single test piece method)"

GB/T1682-1994硫化橡胶低温脆性的测定单试样法

Hair root fragile X mental retardation protein assay for the diagnosis of fragile X syndrome" Rubber, vulcanized& Determination of low-temperature brittleness ( single test piece method)"

发根脆性X智力低下蛋白检测法诊断脆性X综合征GB/T1682-1994硫化橡胶低温脆性的测定单试样法

Modified epoxy acrylic UV resin with polyacid partially replacing acrylic acid, overcoming the brittleness of original resin in some degree and gives resin with fast curing speed, high gloss, high adhesion.

采用部分多元酸代替丙烯酸对环氧丙烯酸UV树脂进行改性，在一定程度上改善了原树脂的脆性，改性后的树脂具有固化速度快、光泽高、黏度高的特点。

A Study on the Notch Brittleness of Stress Rupture in Fe-Mn-Al-Cr Austenitic Heat-Resisting Steels

Fe-Mn-Al-Cr系奥氏体热强钢持久缺口脆性的研究

Charpy toughness and local brittleness of HAZ of X 80 line pipes made in China were studied.

研究了国产X80级管线钢热影响区的冲击韧性和组织的局部脆化.

Causes of DWTT specimen failure for medium thickness pipe are material brittleness addition and V-shape nick.

简单分析了中厚壁钢管产生DWTT无效试样的原因是材料脆性增加和试样V形缺口.

More attentions are paid to high Z materials because of their high melting point and low sputter rate, but such materials remain the problems of brittleness to which is harmful for their application.

高Z材料因其高熔点和低溅射率近年来受到越来越多的关注，但是难熔材料的脆性等问题仍然是这类材料应用的一大障碍。

Fracture Analysis of Torsional Brittleness of Hot-dipped PC Steel Wire

热浸镀PC钢丝扭转脆性断裂分析