casting的例句大全

Experienced with sand-mould , expert at casting process.

具有砂型铸造工作经验,对铸造工艺过程有深入了解.

Casting-aluminum heating device takes Tubular electric heating component as heating material.

铸铝加热器以管状电热元件为发热体.

The quality control department is responsible for drawing up the work instructions of first article inspection, and training casting operators.

由品质管理课负责编制首件检查作业指导书，并对铸造操作员进行培训。

I neglected to check an appropriate box in Janus and it kept casting the chart for his birthplace.

由于我忽视了在软件中选择恰当的地点转置，所以它还是按出生地做出了返照盘。

Only squeeze casting mould design standardization can make it faster and better development.

只有形成了挤压铸造模具设计的标准化,才能使其更快、更好的发展.

Manufacture of heat-resistant epoxy resin casting product for gis/ gcb

GIS/GCB用耐热型环氧浇注件的研制

Breakout of molten steel in billet continuous casting occurs frequently.

在小方坯连铸生产中,漏钢事故经常发生.

Steel-leakage is one of the most serious accidents in Continuous Casting Process.

漏钢是连铸生产中最严重的事故之一.

This equipment is a new one in the field of continuous casting.

该设备是连续铸造领域的新型设备.

The electromagnetic soft-contact continuous casting ( EMCC ) technique is a novel technique.

电磁软接触连铸技术是一门新兴技术.

This must be your continuous casting machine.

这一定是你们的连铸机.

The type of caster is arc continuous casting.

连铸机型式采用弧形连铸.

Thereby, Cu-Ag alloy prpeared by Ohno continuous casting is a new material with better wear resistance.

因此, 通过热型连续定向凝固技术生产的铜银合金是一种耐磨性较好的新材料.

Oxide inclusions were decreased and the quality of continuous casting slab was improved.

达到了减少氧化物夹杂,提高连铸坯质量的目的.

Electromagnetic stirring is an important way to improve the quality of continuous-casting billet.

采用电磁搅拌技术是提高连铸坯质量的重要途径.

Effect of Rare Earth on the Dry Friction of Casting Brass

RE对铸造黄铜干摩擦性能的影响

There are four main technological methods: powder metallurgy, liquid infiltration squeeze casting and compocasting.

制造方法有: 粉末冶金法 、 液态浸渗法、压铸法、熔搅铸造法.

A newly developed novel squeeze casting technique is introduced.

本文重点介绍了一种新型挤压铸造工艺.

The affection carbon content on the average heat flux of slab coninuous casting was discussed.

分析了各种气体模型对激波脱体距离、壁面热流、温度分布和密度分布等的影响.

The mechanism of simulating information feedback based on concurrent design in pressure casting process was launched.

研究高(低)压铸造并行工艺设计中的模拟信息反馈机制.