coatings的例句大全

A kind of-solid anti-corrosive epoxy coatings for drinking water tank-dried in low temperature, is developed.

介绍了一种低温固化 、 高固体分环氧饮水设备用防腐涂料的研制.

Increasing average pore size of coatings film has a trend of making ink dot more round.

涂层平均孔隙增大后,打印墨点变得更圆.

ASTM D 2247-02 , Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity.

在100%相对湿度中测试涂层的防水性的操作规程.

The results indicate : The coatings have prominent anti-sticking, hardness and adhesion power.

结果表明,该涂层具有优良的防粘性, 硬度和附着力.

The factors that influence preparation of intermediate polyester , acrylic resin and coatings are discussed.

研究了影响中间体 、 高附着力丙烯酸树脂及其涂料制备的因素.

The abrasion-resistant composite coating is a new kind of special coatings.

耐磨 复合材料涂料是一种新型的特种涂料.

They give tough, resilient coatings that are abrasion resistant.

它的坚韧特性提供了耐磨损性能.

A thermoplastic resin obtained by polymerization of indene and coumarone; used in coatings and paint and asphalt tile.

一种热塑性树脂，聚合茚和香豆酮制成，用于涂层、油漆和沥青砖。

Corrosion of Arion beam irradiated Al and Al-Mg coatings in aqueous solution

用离子束技术制备的铝和铝－镁镀层在水溶液中的腐蚀研究

Requirement and Selection of Architectural Coatings as Finish in Exterior Insulation and Finish System

外墙外保温饰面涂料的要求和选择

High Permeability Organic Silicon Waterproof and Antipollution Coatings

高渗透有机硅型防水抗污涂料

Test Method for Mar Resistance of Coatings Film

耐划伤性测试方法

EP/ PU function graded coatings not only had the strong adhesive power like EP, but also had the excellent corrosion resistant property like PU: the adhesive power achieved the first level, and resistance to impact 65kg · cm, and coefficient of attrition rate 0.042.

环氧/聚氨酯梯度涂层兼有环氧树脂与基体结合紧密的优点和聚氨酯良好的耐冲蚀磨损性能：附着力达到了1级；耐冲击性达到65kg·cm、磨损率为0.042。

The paper introduced the technical progress in air curing fluorinated polyurethane coatings.

介绍了常温固化含氟聚氨酯涂料的研究进展.

The heat-insulating modes, mechanism and application of air-curing high-temperature heat-insulating coatings are introduced.

介绍了常温固化耐高温隔热涂料的隔热方式 、 机理和应用.

For traditional thermal curing powder coatings, there has a big limit of high curing temperature.

但普通的粉末涂料存在固化温度偏高,不能用于热敏性底材,限制了其应用范围.

Purposes: Manufacturing hydrogen peroxide, dye intermediates, light-cured resin catalyst, photodegradation membrane, coatings and photosensitive polymerization initiator.

用途: 制造双氧水 、 染料中间体 、 光固化树脂催化剂 、 光降解膜, 涂料和光敏聚合引发剂.

The time lapsing artificial ageing of six membrane materials with acrylate, PVDF and PTFE top coatings are investigated by a practical environmental simulation.

本文采用对实际环境进行模拟的人工加速老化方法对表面涂有丙烯酸酯、PVDF（聚偏氟烯）以及PTFE的六种不同的膜材料的老化性能进行了研究。

Application Technology of Corrosion Protective Epoxy Coatings for Pipelines in Acidy Oil-Gas Fields

酸性油气田管道环氧防腐涂料施工工艺

"Accelerated weathering test method for plastics, coatings and rubber materials used for machinery industrial products"

GB/T14522-1993机械工业产品用塑料、涂料、橡胶材料人工气候加速试验方法