coatings的例句大全

Contrast Study on Properties of Three Type Air Curing Fluorocarbon Coatings

三种常温固化氟碳涂料性能的对比研究

The effect of pulse frequency and pulse duration ratio on the abrasion resistance of gold coatings is investigated with pulse plating in cyanide free and trace cyanide baths.

研究了脉冲电镀在微氰镀金，无氰镀金体系中脉冲频率、脉冲占空比对镀金层耐磨性的影响。

SEM analysis demonstrated that surface morphology of the coatings was changed compared with that of basal surface, and were also covered with different granules in nano size. The results of AFM examination also proved almost the same tendancy.

扫描电镜观察发现与纯钛基底面相比，涂层的表面形貌发生了改变，也是布满了各种不同大小的纳米级别的颗粒；AFM检测结果也证实了相同的变化趋势。

Zinc-iron alloy coatings with highly basal preferred orientation were successfully obtained from acidic sulphate electrolytes by further optimizing plating parameters.

通过一步优化沉积工艺条件，成功地制备了高基面择优取向Zn-Fe合金镀层。

Influence of Morphology of Fluorocarbon Coatings with PTFE on the Settlement of Benthic Diatom

含PTFE氟碳涂层表面形貌对底栖硅藻附着的影响

Use of Flatting Agent in Fluorocarbon Coatings

消光剂在氟碳涂料中的应用

New bioactive product, which may be bone-like apatite, was observed on the surface of coatings.

在涂层表面形成新的生物活性涂层，成分可能为类骨磷灰石。

Based its composition and properties, this article has described the present status and future development prospect of application of castor oil, dehydrated castor oil, and blown castor oil in coatings industry.

本文结合蓖麻油的组成结构与性质，概述了蓖麻油和脱水蓖麻油、氧化蓖麻油等相关衍生物在涂料中的应用现状及其应用前景。

Boron carbide coatings were deposited via vacuum plasma spraying, and then their microstructure, phase composition, hardness and bonding strength were examined.

本文采用真空等离子喷涂方法制备碳化硼涂层，对涂层的结构、组成、硬度及结合强度进行了观察与测定。

The proper selection of coatings and cathodic protection ( CP) system is effective in protecting tank bottoms.

合适的涂料选择和阴极保护系统的应用是控制罐底板腐蚀的行之有效的方法。

Study on effect of brazing temperature on wear properties of brazed WC coatings

钎焊温度对WC金属布钎焊耐磨层性能研究

Coatings used in plastic outer casing of household appliances and its application

家电塑料外壳用涂料与涂装

Test method for impact resistance of pipeline coatings ( falling weight test)

管道防腐层抗冲击性试验方法（落锤试验法）

Solvent-based on different coatings formulation, the different types and solvent coating, drying of volatile at.

溶剂型上光涂料因不同的涂料配方, 所用的溶剂种类及比例不同,涂布 、 干燥过程中挥发速度也不同.

We now offer single-mode and multimode mode fibers with high temperature aluminum or copper alloy coatings.

我们现在提供单模和多模光纤高温铝或铜合金涂层.

All Low-E coatings are conductive, unfortunately so is pollution.

e镀膜能导电, 但不幸地是容易污染.

The formulation design, manufacture process and product performances of the resin and coatings thereof are introduced.

介绍了该树脂及涂料的配方设计 、 生产工艺和产品性能.

Thermal barrier coatings had been prepared by laser cladding method.

采用激光熔敷方法在铝合金表面制备一层金属陶瓷耐热涂层.

Ceramic thermal barrier coatings ( TBCs ) have been increasingly used to extend the durability of aircraftturbine engine.

陶瓷热障涂层用于涡轮发动机的热端部件可显著提高其使用温度,延长部件的使用寿命,并提高发动机的效率.

A typical thermal barrier coatings system consists of an bondporous thermally-insulating ceramic coat ing.

因此如何增强涂层系统层间界面的结合强度成为延长热障涂层使用寿命的关键问题.