composites的例句大全

Vertical Density Profile ( VDP) is an important structural characteristic of wood composites and has strong affect on panel properties.

剖面密度分布是木质人造板重要的结构特征，也是影响其物理力学性能的重要因素之一。

Ultrasonic plastic welding ( UPW) is a cost-effective, efficient and clean fusion bonding technique of TPC ( Thermal Plastic Composites), and of great value in application.

超声波塑料焊接是一种经济、高效、环保的热塑性塑料连接新工艺，有极大的推广应用前景。

Effects of Repeated Plastic Working ( RPW) on Structure and Properties of SiC_p/ AZ31 Magnesium Matrix Composites

反复塑性变形对SiC p/AZ31镁基复合材料组织和性能的影响

Effect of Azo Dyes with Different Length of Alkoxy Substituents on Photorefractive Properties of PVK-based Composites

不同烷氧基取代偶氮染料对聚乙烯基咔唑基复合物光折变性能的影响

Tribological and corrosive behavior of PTFE composites filled with PTW in sulfuric acid solution

酸性溶液中PTW增强PTFE复合材料的耐蚀性和摩擦磨损性能

When the content of PFW in Kevlar fabric composite is 20%, the Kevlar fabric composites can obtain the best friction-reducing and anti-wear properties.

当PFW质量分数为20%时，Kevlar纤维织物复合材料的摩擦系数减小75%、磨损率降低82%，Kevlar纤维织物复合材料的减摩抗磨性能最佳。

The activated surface oxygen and oxygen vacancy from CeO2-CNT composites play an important role in two-step ODH reaction by promoting reverse water-gas shift reaction.

对于碳纳米管内负载CeO2催化剂，活化的表面氧和氧空穴在这个两步脱氢中通过促进逆水汽反应承担重要的作用。

SHPB Dynamic Response of Multiaxial Warp-knitted ( MWK) Reinforced Composites

多轴向经编针织（MWK）复合材料SHPB动态响应

Preliminary study of LTM resin systems and their composites

LTM树脂及其复合材料的初步研究

The results indicated the JME modified epoxy mortar was optimal material for erosion and abrasion resistant material for the repair of damaged composites.

JME改性环氧树脂砂浆是高速水流抗冲磨修补的理想材料。

In situ titanium alloy matrix composites were fabricated by melting casting.

用熔铸法制备了原位自生钛合金基复合材料.

Finally, some simple opinions on further development of cyclic fatigue in ceramic matrix composites are presented.

最后, 还对进一步研究陶瓷基复合材料的循环疲劳特性提出了一些粗浅的看法.

Study of dynamic mechanical behavior of cpe/ dz/ vgcf Composites

CPE/DZ/VGCF复合材料动态粘弹性研究

Particle-dispersed is a mostly-used method to fabricate ceramic composites.

颗粒弥散增强复相陶瓷是经常使用的材料复合方法.

Carbon/ Carbon ( C/ C) composites are regarded as the most promising heat-resistant materials for long-playing structures at ultra-high temperature and have important strategic value to the national defense.

碳/碳（C/C）复合材料被认为是最有发展前景的超高温长时间使用的热结构材料，具有重要的国防战略价值。

A forming process for preparing high density crystalline ceramic matrix composites was suggested.

为制备高致密度晶态陶瓷基体复合材料推荐了一种成型工艺和一种制备过程.

Current status and outlook of in situ discontinuously reinforced titanium matrix composites

原位自生非连续增强钛基复合材料的研究现状与展望

Research Progress on Non-Conducting Polymer/ Carbon Nanotubes Functional Composites

非导电聚合物/碳纳米管功能复合材料研究进展

This isothermal crystallization kinetics of PP/ talc composites was treated using Avrami equation and the effect of talc on the crystallization activation energy was treated using Kissinger equation.

用Avrami方程全面分析PP/滑石粉的等温结晶动力学，并由此获得相关的动力学参数；用Kissinger方程研究滑石粉对PP/滑石粉复合材料结晶活化能的影响。

Preparation of Micron Polymer-Fe Capsulized Composites by Mechanic Milling and MR Effect of Concentrated Suspensions

微米级高聚物包埋型金属铁复合粒子的球磨法制备及其磁流变效应